Compare locomotives
Add a locomotive
Cambrian Railways No. 3 “Milford”
No. 3 “Milford” was built by Sharp, Stewart & Co. in 1859 for the Cambrian Railways with the works number 1123. It was actually the second locomotive of this railway since No. 2 “Ruthin” was only delivered by Manning,...
| Cambrian Railways No. 3 “Milford”Remove | |
|---|---|
| Variant | Standard |
| Built | 1859 |
| Manufacturers | Sharp, Stewart & Co. |
| Wheel arrangement | B1 st |
| Gauge | 1435 mm |
| Length | |
| Service mass | |
| Top speed | |
| Power | |
| Engine |
General
| Property | Cambrian Railways No. 3 “Milford” Standard Remove |
|---|---|
| Built | 1859 |
| Manufacturers | Sharp, Stewart & Co. |
| Wheel arrangement | 0-4-2ST |
| Gauge | 1,435 mm |
Dimensions and weights
| Property | Cambrian Railways No. 3 “Milford” Standard Remove |
|---|---|
| Wheelbase | 4.17 m |
| Rigid wheelbase | 4.17 m |
| Water capacity | 3,184 l |
Boiler
| Property | Cambrian Railways No. 3 “Milford” Standard Remove |
|---|---|
| Grate area | 0.948 m² |
| Firebox surface | 5.537 m² |
| Tube heating surface | 55.825 m² |
| Evaporative heating surface | 61.363 m² |
| Total heating surface | 61.4 m² |
Power plant
| Property | Cambrian Railways No. 3 “Milford” Standard Remove |
|---|---|
| Driver diameter | 1,448 mm |
| Boiler pressure | 8.3 bar |
| Expansion type | simple expansion |
| Cylinders | two, 356 x 508 mm |
Power
| Property | Cambrian Railways No. 3 “Milford” Standard Remove |
|---|---|
| Power source | steam |
| Estimated power | 112 kW (152 PS) |
| Starting effort | 31.2 kN |
Calculated values
| Property | Cambrian Railways No. 3 “Milford” Standard Remove |
|---|---|
| Optimal speed | 23 km/h |
| Heating Surface Equivalent | 89.0 m² |
| Cylinder volume/HSE | 1 : 1,133.15 |
| Tractive force/Heating surface | 1 : 10.62 |
| Grate area/Heating surface | 1 : 64.73 |
| Firebox/Tube surface | 1 : 10.08 |
