Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Compare locomotives

Add a locomotive

Great Western Railway class 2600 “Aberdare”

For the coal traffic between Aberdare and Swindon, the GWR had 81 2-6-0 locomotives built from 1900 onwards, also called the “Aberdare class”. It was built under Dean and the first to be built, number 33, still had a ...

Great Western Railway class 2600 “Aberdare”Remove
Variant
as built
Built 1900-1906
Manufacturers Swindon
Wheel arrangement 1C
Gauge 1435 mm
Length
Service mass 54257 kg
Top speed
Power
Engine

General

Property Great Western Railway class 2600 “Aberdare”Remove
Built 1900-1906
Manufacturers Swindon
Wheel arrangement 2-6-0 (Mogul)
Gauge 1,435 mm

Dimensions and weights

Property Great Western Railway class 2600 “Aberdare”Remove
Wheelbase 6.86 m
Total wheelbase 13.92 m
Service mass 54.3 t
Adhesion mass 47.6 t
Total mass 87.3 t
Rigid wheelbase 4.57 m
Axle load 16.1 t
Water capacity 13,639 l

Boiler

Property Great Western Railway class 2600 “Aberdare”Remove
Grate area 1.999 m²
Firebox surface 11.589 m²
Tube heating surface 142.891 m²
Evaporative heating surface 154.479 m²
Total heating surface 154.5 m²

Power plant

Property Great Western Railway class 2600 “Aberdare”Remove
Driver diameter 1,410 mm
Boiler pressure 13.8 bar
Expansion type simple expansion
Cylinders two, 457 x 660 mm

Power

Property Great Western Railway class 2600 “Aberdare”Remove
Power source steam
Estimated power 615 kW (836 PS)
Starting effort 114.8 kN

Calculated values

Property Great Western Railway class 2600 “Aberdare”Remove
Factor of adhesion 1 : 4.06
Optimal speed 32 km/h
Power-to-weight ratio 11.3 kW/t
Heating Surface Equivalent 212.4 m²
Cylinder volume/HSE 1 : 1,020.78
Adhesive weight/Total 1 : 1.14
Tractive force/Heating surface 1 : 15.52
Grate area/Heating surface 1 : 77.28
Firebox/Tube surface 1 : 12.33
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.