Compare locomotives
Add a locomotive
Lombardo-Venetian and Central Italian Railway Company No. 155 to 164
In addition to 50 2-2-2 locomotives from Stephenson, the LVCI received ten more from Beyer, Peacock & Co., which were delivered in 1857. They also had the same cylinder dimensions and roughly the same wheel diameter ....
| Lombardo-Venetian and Central Italian Railway Company No. 155 to 164Remove | |
|---|---|
| Variant | Standard |
| Built | 1857 |
| Manufacturers | Beyer, Peacock & Co. |
| Wheel arrangement | 1A1 |
| Gauge | 1435 mm |
| Length | |
| Service mass | 29590 kg |
| Top speed | |
| Power | |
| Engine |
General
| Property | Lombardo-Venetian and Central Italian Railway Company No. 155 to 164 Standard Remove |
|---|---|
| Built | 1857 |
| Manufacturers | Beyer, Peacock & Co. |
| Wheel arrangement | 2-2-2 (Jenny Lind) |
| Gauge | 1,435 mm |
Dimensions and weights
| Property | Lombardo-Venetian and Central Italian Railway Company No. 155 to 164 Standard Remove |
|---|---|
| Length loco | 7.29 m |
| Wheelbase | 4.57 m |
| Empty mass | 27 t |
| Service mass | 29.6 t |
| Adhesion mass | 13.3 t |
| Total mass | 52 t |
| Rigid wheelbase | 4.57 m |
| Axle load | 13.3 t |
| Water capacity | 7,000 l |
| Fuel capacity | 3 t (coal) |
Boiler
| Property | Lombardo-Venetian and Central Italian Railway Company No. 155 to 164 Standard Remove |
|---|---|
| Grate area | 1.31 m² |
| Firebox surface | 7.75 m² |
| Tube heating surface | 81.62 m² |
| Evaporative heating surface | 89.37 m² |
| Total heating surface | 89.4 m² |
Power plant
| Property | Lombardo-Venetian and Central Italian Railway Company No. 155 to 164 Standard Remove |
|---|---|
| Driver diameter | 1,895 mm |
| Boiler pressure | 7 bar |
| Expansion type | simple expansion |
| Cylinders | two, 400 x 508 mm |
Power
| Property | Lombardo-Venetian and Central Italian Railway Company No. 155 to 164 Standard Remove |
|---|---|
| Power source | steam |
| Estimated power | 170 kW (231 PS) |
| Starting effort | 25.5 kN |
Calculated values
| Property | Lombardo-Venetian and Central Italian Railway Company No. 155 to 164 Standard Remove |
|---|---|
| Factor of adhesion | 1 : 5.09 |
| Optimal speed | 40 km/h |
| Power-to-weight ratio | 5.7 kW/t |
| Heating Surface Equivalent | 128.1 m² |
| Cylinder volume/HSE | 1 : 996.52 |
| Adhesive weight/Total | 1 : 2.23 |
| Tractive force/Heating surface | 1 : 5.96 |
| Grate area/Heating surface | 1 : 68.22 |
| Firebox/Tube surface | 1 : 10.53 |
