Compare locomotives
Add a locomotive
Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth”
When the k.k. Nördliche Staatsbahn (Northern State Railway) received its first six locomotives in 1842, they were at the same time the first locomotives built at the Wiener Neustadt factory. As this railway had mostly...
| Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth”Remove | |
|---|---|
| Variant | Standard |
| Built | 1842 |
| Manufacturers | Wiener Neustadt |
| Wheel arrangement | 2A |
| Gauge | 1435 mm |
| Length | |
| Service mass | 13500 kg |
| Top speed | |
| Power | |
| Engine |
General
| Property | Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth” Standard Remove |
|---|---|
| Built | 1842 |
| Manufacturers | Wiener Neustadt |
| Wheel arrangement | 4-2-0 (Jervis) |
| Gauge | 1,435 mm |
Dimensions and weights
| Property | Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth” Standard Remove |
|---|---|
| Wheelbase | 3.01 m |
| Empty mass | 12 t |
| Service mass | 13.5 t |
| Adhesion mass | 8 t |
| Rigid wheelbase | 1.08 m |
| Axle load | 8 t |
Boiler
| Property | Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth” Standard Remove |
|---|---|
| Grate area | 0.8 m² |
| Firebox surface | 4.2 m² |
| Tube heating surface | 42.3 m² |
| Evaporative heating surface | 46.5 m² |
| Total heating surface | 46.5 m² |
Power plant
| Property | Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth” Standard Remove |
|---|---|
| Driver diameter | 1,528 mm |
| Boiler pressure | 5.5 bar |
| Expansion type | simple expansion |
| Cylinders | two, 316 x 461 mm |
Power
| Property | Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth” Standard Remove |
|---|---|
| Power source | steam |
| Estimated power | 60 kW (82 PS) |
| Starting effort | 14.1 kN |
Calculated values
| Property | Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth” Standard Remove |
|---|---|
| Factor of adhesion | 1 : 5.57 |
| Optimal speed | 26 km/h |
| Power-to-weight ratio | 4.4 kW/t |
| Heating Surface Equivalent | 67.5 m² |
| Cylinder volume/HSE | 1 : 1,071.25 |
| Adhesive weight/Total | 1 : 1.69 |
| Tractive force/Heating surface | 1 : 6.33 |
| Grate area/Heating surface | 1 : 58.13 |
| Firebox/Tube surface | 1 : 10.07 |
