Compare locomotives
Add a locomotive
Saxon XI HT
The XI HT was developed as a heavy tank locomotive for freight trains on mountain routes to replace the older, weaker machines. It had similarities with the recently appeared Prussian T 16 and weighed about the same, ...
| Saxon XI HTRemove | |
|---|---|
| Variant | 1910 variant |
| Built | 1910 |
| Manufacturers | Hartmann |
| Wheel arrangement | E t |
| Gauge | 1435 mm |
| Length | 12080 mm |
| Service mass | 74100 kg |
| Top speed | 45 km/h |
| Power | |
| Engine |
General
| Property | Saxon XI HT1910 variant |
|---|---|
| Built | 1910 |
| Manufacturers | Hartmann |
| Wheel arrangement | 0-10-0T (Ten-coupled) |
| Gauge | 1,435 mm |
Dimensions and weights
| Property | Saxon XI HT1910 variant |
|---|---|
| Length | 12.08 m |
| Wheelbase | 5.60 m |
| Service mass | 74.1 t |
| Adhesion mass | 74.1 t |
| Rigid wheelbase | 2.80 m |
| Axle load | 14.8 t |
| Water capacity | 8,500 l |
| Fuel capacity | 2.8 t (coal) |
Boiler
| Property | Saxon XI HT1910 variant |
|---|---|
| Grate area | 2 m² |
| Evaporative heating surface | 124.49 m² |
| Superheater surface | 36.7 m² |
| Total heating surface | 161.2 m² |
Power plant
| Property | Saxon XI HT1910 variant |
|---|---|
| Driver diameter | 1,260 mm |
| Boiler pressure | 12 bar |
| Expansion type | simple expansion |
| Cylinders | two, 620 x 630 mm |
Power
| Property | Saxon XI HT1910 variant |
|---|---|
| Power source | steam |
| Indicated power | 809 kW (1,100 PS) |
| Top speed | 45 km/h |
| Starting effort | 196.0 kN |
Calculated values
| Property | Saxon XI HT1910 variant |
|---|---|
| Factor of adhesion | 1 : 3.71 |
| Optimal speed | 26 km/h |
| Power-to-weight ratio | 10.9 kW/t |
| Adhesive weight/Total | 1 : 1.00 |
| Tractive force/Heating surface | 1 : 25.40 |
| Grate area/Heating surface | 1 : 80.60 |
| Total/Superheater | 1 : 3.39 |
