Compare locomotives
Add a locomotive
Nordeste “Yatay”
The Ferrocarril Nordeste Argentino received a large number of locomotives from Neilson in Glasgow when it was founded. These 32 locomotives had the wheel arrangement 0-6-0 and were later converted to 2-6-0. The last s...
| Nordeste “Yatay”Remove | |
|---|---|
| Variant | Standard |
| Built | 1888 |
| Manufacturers | Neilson & Co. |
| Wheel arrangement | 1C |
| Gauge | 1000 mm |
| Length | |
| Service mass | 33528 kg |
| Top speed | |
| Power | |
| Engine |
General
| Property | Nordeste “Yatay” Standard Remove |
|---|---|
| Built | 1888 |
| Manufacturers | Neilson & Co. |
| Wheel arrangement | 2-6-0 (Mogul) |
| Gauge | 1,000 mm |
Dimensions and weights
| Property | Nordeste “Yatay” Standard Remove |
|---|---|
| Wheelbase | 5.66 m |
| Total wheelbase | 10.69 m |
| Service mass | 33.5 t |
| Adhesion mass | 28.9 t |
| Total mass | 53.4 t |
| Rigid wheelbase | 3.66 m |
| Axle load | 10.4 t |
| Water capacity | 6,299 l |
| Fuel capacity | 5.1 t (wood) |
Boiler
| Property | Nordeste “Yatay” Standard Remove |
|---|---|
| Grate area | 1.29 m² |
| Firebox surface | 5.86 m² |
| Tube heating surface | 64.932 m² |
| Evaporative heating surface | 70.792 m² |
| Total heating surface | 70.8 m² |
Power plant
| Property | Nordeste “Yatay” Standard Remove |
|---|---|
| Driver diameter | 1,219 mm |
| Boiler pressure | 9.7 bar |
| Expansion type | simple expansion |
| Cylinders | two, 356 x 559 mm |
Power
| Property | Nordeste “Yatay” Standard Remove |
|---|---|
| Power source | steam |
| Estimated power | 179 kW (243 PS) |
| Starting effort | 47.6 kN |
Calculated values
| Property | Nordeste “Yatay” Standard Remove |
|---|---|
| Factor of adhesion | 1 : 5.96 |
| Optimal speed | 23 km/h |
| Power-to-weight ratio | 5.3 kW/t |
| Heating Surface Equivalent | 100.1 m² |
| Cylinder volume/HSE | 1 : 1,108.92 |
| Adhesive weight/Total | 1 : 1.16 |
| Tractive force/Heating surface | 1 : 14.03 |
| Grate area/Heating surface | 1 : 54.88 |
| Firebox/Tube surface | 1 : 11.08 |
