Compare locomotives
Add a locomotive
Prussian T 0
The class T 0 referred to two types of small tank locomotives that were only powered on one of two axles. The first four locomotives were omnibus locomotives with a baggage compartment, but since this did not prove it...
| Prussian T 0Remove | |
|---|---|
| Variant | standard type |
| Built | 1883 |
| Manufacturers | Henschel |
| Wheel arrangement | 1A wt |
| Gauge | 1435 mm |
| Length | 6399 mm |
| Service mass | 20200 kg |
| Top speed | 60 km/h |
| Power | |
| Engine |
General
| Property | Prussian T 0standard type |
|---|---|
| Built | 1883 |
| Manufacturers | Henschel |
| Wheel arrangement | 2-2-0WT (Planet) |
| Gauge | 1,435 mm |
Dimensions and weights
| Property | Prussian T 0standard type |
|---|---|
| Length | 6.40 m |
| Wheelbase | 3.50 m |
| Total wheelbase | 3.50 m |
| Service mass | 20.2 t |
| Adhesion mass | 10.7 t |
| Rigid wheelbase | 3.50 m |
| Axle load | 10.7 t |
Boiler
| Property | Prussian T 0standard type |
|---|---|
| Grate area | 0.8 m² |
| Firebox surface | 3.7 m² |
| Tube heating surface | 30.8 m² |
| Evaporative heating surface | 34.5 m² |
| Total heating surface | 34.5 m² |
Power plant
| Property | Prussian T 0standard type |
|---|---|
| Driver diameter | 1,150 mm |
| Boiler pressure | 12 bar |
| Expansion type | compound |
| Cylinders | two, HP: 270 x 420 mm and LP: 440 x 420 mm |
Power
| Property | Prussian T 0standard type |
|---|---|
| Power source | steam |
| Estimated power | 120 kW (163 PS) |
| Top speed | 60 km/h |
| Starting effort | 19.7 kN |
| Starting effort simple | 23.7 kN |
Calculated values
| Property | Prussian T 0standard type |
|---|---|
| Factor of adhesion | 1 : 5.32 |
| Optimal speed | 37 km/h |
| Power-to-weight ratio | 5.9 kW/t |
| Heating Surface Equivalent | 53.0 m² |
| Cylinder volume/HSE | 1 : 1,056.20 |
| Adhesive weight/Total | 1 : 1.89 |
| Tractive force/Heating surface | 1 : 11.94 |
| Grate area/Heating surface | 1 : 43.13 |
| Firebox/Tube surface | 1 : 8.32 |
