Compare locomotives
Add a locomotive
Great Southern & Western class 101 “Standard Goods”
The most numerous class of Irish locomotives was a six-coupled goods locomotive, which was purchased 111 times over a period of 37 years. It carried the class number 101 on the GS&WR and was designated class J15 on th...
| Great Southern & Western class 101 “Standard Goods”Remove | |
|---|---|
| Variant | 17 inch |
| Built | 1866-1881 |
| Manufacturers | Inchicore;Beyer, Peacock & Co.;Sharp, Stewart & Co. |
| Wheel arrangement | C |
| Gauge | 1435 mm |
| Length | |
| Service mass | 32717 kg |
| Top speed | |
| Power | |
| Engine |
General
| Property | Great Southern & Western class 101 “Standard Goods”17 inch |
|---|---|
| Built | 1866-1881 |
| Manufacturers | Inchicore, Beyer, Peacock & Co., Sharp, Stewart & Co. |
| Wheel arrangement | 0-6-0 (Six-coupled) |
| Gauge | 1,435 mm |
Dimensions and weights
| Property | Great Southern & Western class 101 “Standard Goods”17 inch |
|---|---|
| Wheelbase | 4.72 m |
| Service mass | 32.7 t |
| Adhesion mass | 32.7 t |
| Total mass | 61.7 t |
| Rigid wheelbase | 4.72 m |
| Axle load | 11.9 t |
| Water capacity | 8,476 l |
| Fuel capacity | 4.1 t (coal) |
Boiler
| Property | Great Southern & Western class 101 “Standard Goods”17 inch |
|---|---|
| Grate area | 1.626 m² |
| Firebox surface | 8.919 m² |
| Tube heating surface | 79.525 m² |
| Evaporative heating surface | 88.444 m² |
| Total heating surface | 88.4 m² |
Power plant
| Property | Great Southern & Western class 101 “Standard Goods”17 inch |
|---|---|
| Driver diameter | 1,568 mm |
| Boiler pressure | 9.7 bar |
| Expansion type | simple expansion |
| Cylinders | two, 432 x 610 mm |
Power
| Property | Great Southern & Western class 101 “Standard Goods”17 inch |
|---|---|
| Power source | steam |
| Estimated power | 242 kW (329 PS) |
| Starting effort | 59.5 kN |
Calculated values
| Property | Great Southern & Western class 101 “Standard Goods”17 inch |
|---|---|
| Factor of adhesion | 1 : 5.40 |
| Optimal speed | 26 km/h |
| Power-to-weight ratio | 7.4 kW/t |
| Heating Surface Equivalent | 133.0 m² |
| Cylinder volume/HSE | 1 : 1,342.00 |
| Adhesive weight/Total | 1 : 1.00 |
| Tractive force/Heating surface | 1 : 14.04 |
| Grate area/Heating surface | 1 : 54.39 |
| Firebox/Tube surface | 1 : 8.92 |
