Compare locomotives
Add a locomotive
Saxon VIII V 2
For use with heavy passenger trains, the VIII V 2 was derived from the VIII V 1 express locomotive. It received significantly smaller diving wheels, but still had a two-cylinder compound engine and a Belpaire firebox ...
| Saxon VIII V 2Remove | |
|---|---|
| Variant | |
| Built | 1900-1902 |
| Manufacturers | Hartmann;BMAG;Esslingen;Linke-Hoffmann |
| Wheel arrangement | 2B |
| Gauge | 1435 mm |
| Length | |
| Service mass | 54500 kg |
| Top speed | 80 km/h |
| Power | |
| Engine |
General
| Property | Saxon VIII V 2Remove |
|---|---|
| Built | 1900-1902 |
| Manufacturers | Hartmann, BMAG, Esslingen, Linke-Hoffmann |
| Wheel arrangement | 4-4-0 (American) |
| Gauge | 1,435 mm |
Dimensions and weights
| Property | Saxon VIII V 2Remove |
|---|---|
| Wheelbase | 6.60 m |
| Empty mass | 49 t |
| Service mass | 54.5 t |
| Adhesion mass | 32 t |
| Axle load | 16 t |
| Water capacity | 21,000 l |
Boiler
| Property | Saxon VIII V 2Remove |
|---|---|
| Grate area | 1.87 m² |
| Firebox surface | 15.6 m² |
| Tube heating surface | 121.3 m² |
| Evaporative heating surface | 136.9 m² |
| Total heating surface | 136.9 m² |
Power plant
| Property | Saxon VIII V 2Remove |
|---|---|
| Driver diameter | 1,590 mm |
| Boiler pressure | 13 bar |
| Expansion type | compound |
| Cylinders | two, HP: 460 x 600 mm and LP: 680 x 600 mm |
Power
| Property | Saxon VIII V 2Remove |
|---|---|
| Power source | steam |
| Estimated power | 550 kW (748 PS) |
| Top speed | 80 km/h |
| Starting effort | 60.5 kN |
| Starting effort simple | 72.6 kN |
Calculated values
| Property | Saxon VIII V 2Remove |
|---|---|
| Factor of adhesion | 1 : 5.19 |
| Optimal speed | 56 km/h |
| Power-to-weight ratio | 10.1 kW/t |
| Heating Surface Equivalent | 214.9 m² |
| Cylinder volume/HSE | 1 : 970.98 |
| Adhesive weight/Total | 1 : 1.70 |
| Tractive force/Heating surface | 1 : 9.23 |
| Grate area/Heating surface | 1 : 73.21 |
| Firebox/Tube surface | 1 : 7.78 |
