Compare locomotives
Add a locomotive
Buffalo, Rochester & Pittsburgh class F4
The class F4 of the BR&P designated 0-8-0 switchers which were built by ALCO-Brooks. They had cylinders of 22 by 28 inches and drivers of 51 inches. With a boiler pressure of 185 psi , this resulted in a starting trac...
| Buffalo, Rochester & Pittsburgh class F4Remove | |
|---|---|
| Variant | Standard |
| Built | 1918, 1923 |
| Manufacturers | ALCO |
| Wheel arrangement | D |
| Gauge | 1435 mm |
| Length | |
| Service mass | 104780 kg |
| Top speed | |
| Power | |
| Engine |
General
| Property | Buffalo, Rochester & Pittsburgh class F4 Standard Remove |
|---|---|
| Built | 1918, 1923 |
| Manufacturers | ALCO |
| Wheel arrangement | 0-8-0 (Eight-coupled) |
| Gauge | 1,435 mm |
Dimensions and weights
| Property | Buffalo, Rochester & Pittsburgh class F4 Standard Remove |
|---|---|
| Service mass | 104.8 t |
| Adhesion mass | 104.8 t |
| Axle load | 26.2 t |
Power plant
| Property | Buffalo, Rochester & Pittsburgh class F4 Standard Remove |
|---|---|
| Driver diameter | 1,295 mm |
| Boiler pressure | 12.8 bar |
| Expansion type | simple expansion |
| Cylinders | two, 559 x 711 mm |
Power
| Property | Buffalo, Rochester & Pittsburgh class F4 Standard Remove |
|---|---|
| Power source | steam |
| Starting effort | 185.9 kN |
Calculated values
| Property | Buffalo, Rochester & Pittsburgh class F4 Standard Remove |
|---|---|
| Factor of adhesion | 1 : 5.53 |
| Adhesive weight/Total | 1 : 1.00 |
