Compare locomotives
Add a locomotive
Prussian S 5
The S 5 were express locomotives with a compound engine that were part of the development line of the Prussian 4-4-0 machines from the S 2 to the S 6 and were actually an enlarged development of the S 3. Saturated ste...
| Prussian S 5Remove | |
|---|---|
| Variant | S 5[h]2[/h] |
| Built | 1905-1911 |
| Manufacturers | Vulcan;Schichau |
| Wheel arrangement | 2B |
| Gauge | 1435 mm |
| Length | 17761 mm |
| Service mass | 53600 kg |
| Top speed | 100 km/h |
| Power | |
| Engine |
General
| Property | Prussian S 5S 5[h]2[/h] |
|---|---|
| Built | 1905-1911 |
| Manufacturers | Vulcan, Schichau |
| Wheel arrangement | 4-4-0 (American) |
| Gauge | 1,435 mm |
Dimensions and weights
| Property | Prussian S 5S 5[h]2[/h] |
|---|---|
| Length | 17.76 m |
| Wheelbase | 7.60 m |
| Service mass | 53.6 t |
| Adhesion mass | 32.7 t |
| Axle load | 17.1 t |
| Water capacity | 21,500 l |
| Fuel capacity | 7 t (coal) |
Boiler
| Property | Prussian S 5S 5[h]2[/h] |
|---|---|
| Grate area | 2.32 m² |
| Firebox surface | 11.15 m² |
| Tube heating surface | 136.43 m² |
| Evaporative heating surface | 147.58 m² |
| Total heating surface | 147.6 m² |
Power plant
| Property | Prussian S 5S 5[h]2[/h] |
|---|---|
| Driver diameter | 1,980 mm |
| Boiler pressure | 12 bar |
| Expansion type | compound |
| Cylinders | two, HP: 475 x 600 mm and LP: 700 x 600 mm |
Power
| Property | Prussian S 5S 5[h]2[/h] |
|---|---|
| Power source | steam |
| Indicated power | 571 kW (776 PS) |
| Top speed | 100 km/h |
| Starting effort | 47.8 kN |
| Starting effort simple | 57.3 kN |
Calculated values
| Property | Prussian S 5S 5[h]2[/h] |
|---|---|
| Factor of adhesion | 1 : 6.72 |
| Optimal speed | 72 km/h |
| Power-to-weight ratio | 10.7 kW/t |
| Heating Surface Equivalent | 203.3 m² |
| Cylinder volume/HSE | 1 : 1,090.72 |
| Adhesive weight/Total | 1 : 1.64 |
| Tractive force/Heating surface | 1 : 6.76 |
| Grate area/Heating surface | 1 : 63.61 |
| Firebox/Tube surface | 1 : 12.24 |