Compare locomotives
Add a locomotive
Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth”
When the k.k. Nördliche Staatsbahn (Northern State Railway) received its first six locomotives in 1842, they were at the same time the first locomotives built at the Wiener Neustadt factory. As this railway had mostly...
General
| Property | Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth”Remove |
|---|---|
| Built | 1842 |
| Manufacturers | Wiener Neustadt |
| Wheel arrangement | 4-2-0 (Jervis) |
| Gauge | 1,435 mm (Standard gauge) |
Dimensions and weights
| Property | Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth”Remove |
|---|---|
| Wheelbase | 3.01 m |
| Rigid wheelbase | 1.08 m |
| Empty weight | 12 t |
| Service weight | 13.5 t |
| Adhesive weight | 8 t |
| Axle load | 8 t |
Boiler
| Property | Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth”Remove |
|---|---|
| Grate area | 0.8 m² |
| Firebox surface | 4.2 m² |
| Tube heating surface | 42.3 m² |
| Evaporative heating surface | 46.5 m² |
| Total heating surface | 46.5 m² |
Power plant
| Property | Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth”Remove |
|---|---|
| Driver diameter | 1,528 mm |
| Boiler pressure | 5.5 bar |
| Expansion type | simple expansion |
| Cylinders | two, 316 x 461 mm |
Power
| Property | Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth”Remove |
|---|---|
| Power source | steam |
| Estimated power | 60 kW (82 PS) |
| Starting effort | 14.1 kN |
Calculated values
| Property | Imperial-Royal Northern State Railway “Sedletz” to “Hohenmauth”Remove |
|---|---|
| Factor of adhesion | 1 : 5.57 |
| Optimal speed | 26 km/h |
| Power-to-weight ratio | 4.4 kW/t |
| Heating Surface Equivalent | 67.5 m² |
| Cylinder volume/HSE | 1 : 1,071.25 |
| Adhesive weight/Total | 1 : 1.69 |
| Tractive force/Heating surface | 1 : 6.33 |
| Grate area/Heating surface | 1 : 58.13 |
| Firebox/Tube surface | 1 : 10.07 |