Compare locomotives
Add a locomotive
Great Eastern class T19
The T19 was one of James Holden's first designs in his service on the Great Eastern Railway. It was created as an express locomotive in the then classic 2-4-0 wheel arrangement with very large drivrs with a diameter o...
General
| Property | Great Eastern class T19 as built |
|---|---|
| Built | 1886-1897 |
| Manufacturers | Stratford |
| Wheel arrangement | 2-4-0 (Porter) |
| Gauge | 1,435 mm (Standard gauge) |
Dimensions and weights
| Property | Great Eastern class T19 as built |
|---|---|
| Length | 14.68 m |
| Wheelbase | 5.03 m |
| Rigid wheelbase | 5.03 m |
| Total wheelbase | 11.15 m |
| Service weight | 42.7 t |
| Adhesive weight | 28 t |
| Axle load | 14 t |
| Total weight | 73.8 t |
| Water capacity | 12,004 l |
| Fuel capacity | 5.1 t (coal) |
Boiler
| Property | Great Eastern class T19 as built |
|---|---|
| Grate area | 1.672 m² |
| Firebox surface | 9.801 m² |
| Tube heating surface | 104.516 m² |
| Evaporative heating surface | 114.317 m² |
| Total heating surface | 114.3 m² |
Power plant
| Property | Great Eastern class T19 as built |
|---|---|
| Driver diameter | 2,134 mm |
| Boiler pressure | 10.3 bar |
| Expansion type | simple expansion |
| Cylinders | two, 457 x 610 mm |
Power
| Property | Great Eastern class T19 as built |
|---|---|
| Power source | steam |
| Estimated power | 429 kW (583 PS) |
| Starting effort | 52.5 kN |
Calculated values
| Property | Great Eastern class T19 as built |
|---|---|
| Factor of adhesion | 1 : 5.24 |
| Optimal speed | 50 km/h |
| Power-to-weight ratio | 10.1 kW/t |
| Heating Surface Equivalent | 163.3 m² |
| Cylinder volume/HSE | 1 : 1,225.55 |
| Adhesive weight/Total | 1 : 1.52 |
| Tractive force/Heating surface | 1 : 9.59 |
| Grate area/Heating surface | 1 : 68.37 |
| Firebox/Tube surface | 1 : 10.66 |