Compare locomotives
Add a locomotive
Lancashire & Yorkshire classes 27 and 28
After the L&YR had used the DX Goods from the LNWR, John Aspinall had designed the later class 27 as a new standard goods locomotive. It was a relatively simple 0-6-0 with inside cylinders and Joy valve gear. With a d...
General
| Property | Lancashire & Yorkshire classes 27 and 28 as built |
|---|---|
| Built | 1889-1918 |
| Manufacturers | Horwich |
| Wheel arrangement | 0-6-0 (Six-coupled) |
| Gauge | 1,435 mm (Standard gauge) |
Dimensions and weights
| Property | Lancashire & Yorkshire classes 27 and 28 as built |
|---|---|
| Length | 14.78 m |
| Wheelbase | 4.98 m |
| Rigid wheelbase | 4.98 m |
| Service weight | 42.8 t |
| Adhesive weight | 42.8 t |
| Axle load | 15.2 t |
| Total weight | 69.4 t |
| Water capacity | 8,184 l |
| Fuel capacity | 3 t (coal) |
Boiler
| Property | Lancashire & Yorkshire classes 27 and 28 as built |
|---|---|
| Grate area | 1.742 m² |
| Firebox surface | 10.004 m² |
| Tube heating surface | 102.409 m² |
| Evaporative heating surface | 112.413 m² |
| Total heating surface | 112.4 m² |
Power plant
| Property | Lancashire & Yorkshire classes 27 and 28 as built |
|---|---|
| Driver diameter | 1,549 mm |
| Boiler pressure | 11 bar |
| Expansion type | simple expansion |
| Cylinders | two, 457 x 660 mm |
Power
| Property | Lancashire & Yorkshire classes 27 and 28 as built |
|---|---|
| Power source | steam |
| Estimated power | 447 kW (608 PS) |
| Starting effort | 83.5 kN |
Calculated values
| Property | Lancashire & Yorkshire classes 27 and 28 as built |
|---|---|
| Factor of adhesion | 1 : 5.03 |
| Optimal speed | 32 km/h |
| Power-to-weight ratio | 10.4 kW/t |
| Heating Surface Equivalent | 162.4 m² |
| Cylinder volume/HSE | 1 : 1,334.95 |
| Adhesive weight/Total | 1 : 1.00 |
| Tractive force/Heating surface | 1 : 15.52 |
| Grate area/Heating surface | 1 : 64.53 |
| Firebox/Tube surface | 1 : 10.24 |
