Central Mexicano class E
The Central Mexicano also received a total of 15 locomotives of the US type of the Mason-Fairlie in 1890, which essentially corresponded to the British Single Fairlie. Under the boiler barrel was a bogie that held the cylinders, three driving axles and a leading axle. At the rear, the tender rested on a three-axle bogie. The firebox hang between the bogies and could therefore be built deep enough.
In contemporary depictions, the locomotives were described as a successful design with a comfortable cab. Although they could negotiate the tightest curves with ease, the running smoothness was apparently not particularly good. Nevertheless, all locomotives were already scrapped between 1899 and 1908. This is probably due to the fact that more modern locomotives without moving steam lines were now available.
Technical data
General
- Built
- 1890
- Manufacturers
- Baldwin
- Wheel arrangement
- 2-6-6T (Single Fairlie)
- Gauge
- 1,435 mm (Standard gauge)
Dimensions and weights
- Wheelbase
- 12.48 m
- Service mass
- 78.6 t
- Adhesion mass
- 42.3 t
- Rigid wheelbase
- 2.85 m
- Axle load
- 14.1 t
- Water capacity
- 13,249 l
Boiler
- Grate area
- 2.769 m²
- Firebox surface
- 14.05 m²
- Tube heating surface
- 152.897 m²
- Evaporative heating surface
- 166.947 m²
- Total heating surface
- 166.9 m²
Power plant
- Driver diameter
- 1,245 mm
- Boiler pressure
- 9 bar
- Expansion type
- simple expansion
- Cylinders
- two, 508 x 610 mm
Power
- Power source
- steam
- Estimated power
- 429 kW (583 PS)
- Starting effort
- 96.3 kN
Calculated values
- Factor of adhesion
- 1 : 4.31
- Optimal speed
- 27 km/h
- Power-to-weight ratio
- 5.5 kW/t
- Heating Surface Equivalent
- 237.2 m²
- Cylinder volume/HSE
- 1 : 1,041.80
- Adhesive weight/Total
- 1 : 1.86
- Tractive force/Heating surface
- 1 : 12.05
- Grate area/Heating surface
- 1 : 60.29
- Firebox/Tube surface
- 1 : 10.88