Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Western Australian Government Railways classes O and Oa

Australia 1896 56 produced
O218 in the museum at Bassendean in 2014 Bahnfrend CC BY-SA

The class O was a 2-8-0 locomotive for freight service on light rails around the Eastern Goldfields. It had small drivers with a diameter of three feet and cylinders with a diameter of 15.5 inches and a stroke of 21 inches. A special feature were small additional water tanks on the sides of the boiler. 36 were built by Neilson between 1896 and 1898, while a further ten came from Dübs. It took only a few years until they were replaced on the mainline by the class Ec mixed-traffic Pacific and the class K 2-8-4T. From now on, they were used on branch lines. In 1907 and 1908, ten were rebuilt to class N 4-4-4T suburban tanks.

As it turned out that the others needed larger coal supplies for light agricultural work, the bunkers were enlarged from three and a half to seven and a half tons. At the same time, the water tanks were reduced from a total of 2,500 to 2,000 gallons. Remains of the ten which had been rebuilt to class N were used to create ten new locomotives, which received drivers of three feet and six and a half inches and also had the larger coal bunkers. These were designated class Oa. All were withdrawn between 1940 and 1962. Only O218 was preserved and is being owned by the museum in Bassendean. From 2015 it was on a loan to the museum in Walkaway.

Technical data

General

Property O Oa
Built 1896-1898 1909-1912
Manufacturers Dübs & Co., Neilson & Co. Midland Railway Workshops
Wheel arrangement 2-8-0 (Consolidation)
Gauge 1,067 mm (Cape gauge)

Dimensions and weights

Property O Oa
Service mass 35.1 t
Total mass 59.4 t 63.7 t
Water capacity 11,364 l 9,093 l
Fuel capacity 3.6 t (coal) 7.6 t (coal)

Boiler

Property O Oa
Grate area 1.463 m²
Firebox surface 8.64 m²
Tube heating surface 71.907 m²
Evaporative heating surface 80.547 m²
Total heating surface 80.5 m²

Power plant

Property O Oa
Driver diameter 914 mm 1,080 mm
Boiler pressure 11 bar
Expansion type simple expansion
Cylinders two, 394 x 533 mm

Power

Property O Oa
Power source steam
Estimated power 280 kW (381 PS)
Starting effort 84.8 kN 71.8 kN

Calculated values

Property O Oa
Optimal speed 21 km/h 24 km/h
Power-to-weight ratio 8.0 kW/t 4.4 kW/t
Heating Surface Equivalent 123.7 m²
Cylinder volume/HSE 1 : 1,049.47
Tractive force/Heating surface 1 : 21.98 1 : 18.62
Grate area/Heating surface 1 : 55.06
Firebox/Tube surface 1 : 8.32
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.