Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Czechoslovak State Railways class T 334.0

Czech Railways and Slovak Railway classes 710 and 711

Czechoslovakia 1961 576 produced
Class 710 of the CD in 2007 in Kolín PetrS CC BY-SA 3.0

The T 334.0 was a medium shunting locomotive that was also known in the GDR. In 1957, CKD had built three prototypes with the 410 hp 12 V 170 DR engine, which went into series production from 1961 in a slightly modified form with a different hydraulic transmission. The other gearbox was used because it allowed a higher top speed of 60 km/h and at the same time offered a shunting gear for 30 km/h. In contrast to other shunting locomotives with axles mounted in the frame that were built at this time, the T 334.0 had no external connecting rods, but was driven directly on the axles by cardan shafts.

The first series of a total of 325 pieces was made directly by CKD until 1966. Of these, a total of 71 went to works railways in the GDR, for example to the chemical fiber combine Schwarza and the Maxhütte Unterwellenborn. A second series of 120 locomotives was made by SMZ in Dubnica between 1966 and 1968 and a third series of 131 pieces came by Turcianska strojarne n.p. in Martin between 1969 and 1973. The machines of the Czechoslovak State Railways were painted green and were therefore nicknamed “Rosnicka” (tree frog). From 1988 they were designated as class 710 and from 1995 they were fitted with new engines by the Czech State Railways, as the basic structure was still in very good condition. The latter became class 711. Some of the locomotives also remained in use on works railways and in other countries for longer.

Technical data

General

Built
1961-1973
Manufacturers
&#268, KD, SMZ, Tur&#269, ianske strojárne
Wheel arrangement
C
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length
9.44 m
Wheelbase
4.00 m
Service mass
40.5 t
Adhesion mass
40.5 t
Rigid wheelbase
4.00 m
Axle load
13.5 t

Power plant

Engine
12 V 170 DR
Engine type
V12 diesel

Power

Power source
diesel-hydraulic
Indicated power
302 kW (411 PS)
Top speed
60 km/h
Starting effort
110.0 kN

Calculated values

Factor of adhesion
1 : 3.61
Power-to-weight ratio
7.5 kW/t
Adhesive weight/Total
1 : 1.00
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.