Great Southern & Western class 900
Inchicore class A1
In 1915, the Great Southern & Western had number 900 built in Inchicore as a banker locomotive for the incline between Kingsbridge and Clondalkin. It had a 4-8-0T wheel arrangement, making it the only Irish broad gauge locomotive to have four coupled axles. It had inside cylinders, a Belpaire firebox and some common parts with the classes 362 and 368.
In 1924 an identical locomotive was built with the number 901. In reality, however, it turned out that they easily derailed in marshalling yards with tight curves. Number 900 was soon rebuilt into a 4-6-2T by removing the coupling rods to the last axle, but this did not have the desired effect. It was withdrawn in 1928 and the 901 in 1931 because they did not perform roles for which there were no other suitable locomotives.
Technical data
General
- Built
- 1915, 1924
- Manufacturers
- Inchicore
- Wheel arrangement
- 4-8-0T (Twelve-wheeler)
- Gauge
- 1,600 mm (Irish broad gauge)
Dimensions and weights
- Length
- 11.55 m
- Wheelbase
- 8.87 m
- Service mass
- 81.8 t
- Adhesion mass
- 67.1 t
- Rigid wheelbase
- 4.65 m
- Axle load
- 16.5 t
- Water capacity
- 6,818 l
- Fuel capacity
- 3.6 t (coal)
Boiler
- Grate area
- 2.304 m²
- Firebox surface
- 12.867 m²
- Tube heating surface
- 132.526 m²
- Evaporative heating surface
- 145.393 m²
- Total heating surface
- 145.4 m²
Power plant
- Driver diameter
- 1,384 mm
- Boiler pressure
- 12.1 bar
- Expansion type
- simple expansion
- Cylinders
- two, 489 x 660 mm
Power
- Power source
- steam
- Estimated power
- 597 kW (812 PS)
- Starting effort
- 117.0 kN
Calculated values
- Factor of adhesion
- 1 : 5.62
- Optimal speed
- 31 km/h
- Power-to-weight ratio
- 7.3 kW/t
- Heating Surface Equivalent
- 209.7 m²
- Cylinder volume/HSE
- 1 : 1,182.50
- Adhesive weight/Total
- 1 : 1.22
- Tractive force/Heating surface
- 1 : 16.80
- Grate area/Heating surface
- 1 : 63.10
- Firebox/Tube surface
- 1 : 10.30