Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Paris-Lyon-Méditerranée No. 1 to 680

French State Railway 141 C to F

France 1918 680 produced
Photo from the SLM data sheet SBB Historic CC BY-SA 4.0

Between 1918 and 1927, the PLM received 490 four-cylinder compound Mikados which had been inspired by earlier Mikados built by the SFCM and Baldwin. The first 20 had been built by the Swiss SLM, but all others came from different French manufacturers. What was special compared to the usual French de Glehn compounds, was that the high pressure cylinders were on the inside and inclined, while the low pressure cylinders were on the outside at the front. With a driver diameter of 1,650 mm (65 inches), they were intended for mixed traffic and were approved for 95 km/h (59 mph). 

Soon they were designated 141 C and 190 more were built in 1933 and 1934. After the founding of the SNCF, the subclasses 141 D to F were created by rebuilding the 141 C. The 141 D consisted of 124 locomotives which had received either an ACFI or DABEG feedwater heater. 254 locomotives got modifications on the exhaust, got steam deflectors and were called 141 E. These now had 2,400 instead of 1,950 hp. By changing the leading axle of 195 locomotives to allow a top speed of 105 km/h, the 141 F was created.

All in all, both the unrebuilt and the rebuilt forms of these locomotives were very successful. After World War II, the decision to order the 141 R might have been influenced by the versatility of the 141 C. 141 F 282 was preserved and can today be found at the Cité du Train at Mulhouse.

Technical data

General

Built
1918-1927, 1933-1934
Manufacturers
SLM, Schneider, SFCM, Fives-Lille, Blanc-Misseron
Wheel arrangement
2-8-2 (Mikado)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length
22.74 m
Length loco
13.81 m
Wheelbase
11.05 m
Total wheelbase
16.30 m
Service mass
97.1 t
Adhesion mass
70.4 t
Rigid wheelbase
5.40 m
Axle load
17.8 t
Water capacity
25,000 l
Fuel capacity
7 t (coal)

Boiler

Grate area
4.25 m²
Firebox surface
15.67 m²
Tube heating surface
204.62 m²
Evaporative heating surface
220.29 m²
Superheater surface
70.63 m²
Total heating surface
290.9 m²

Power plant

Driver diameter
1,650 mm
Boiler pressure
16 bar
Expansion type
compound
Cylinders
four, HP: 510 x 650 mm and LP: 720 x 700 mm

Power

Power source
steam
Indicated power
1,435 kW (1,951 PS)
Top speed
95 km/h
Starting effort
190.1 kN
Starting effort simple
228.1 kN

Calculated values

Factor of adhesion
1 : 3.63
Optimal speed
47 km/h
Power-to-weight ratio
14.8 kW/t
Heating Surface Equivalent
439.9 m²
Cylinder volume/HSE
1 : 1,251.58
Adhesive weight/Total
1 : 1.38
Tractive force/Heating surface
1 : 13.65
Grate area/Heating surface
1 : 68.45
Firebox/Tube surface
1 : 13.06
Total/Superheater
1 : 3.12
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.