Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Paris-Orléans No. 4501 to 4600

French State Railway 4-231 A

France 1907 100 produced
flickr/Historical Railway Images PD

Around 1905, the PO was looking for more powerful express locomotives, since the existing 4-6-0 locomotives of series 4001 to 4084 had reached their limits. The solution was the 4-6-2 wheel arrangement, also known as “Pacific”. This was the first Pacific in Europe to be used on main lines.

With the additional trailing axle, it was possible to install a larger firebox with a grate area of more than four square meters. In order not to shift the center of gravity too far back and thus away from the driving axles, the firebox had a trapezoidal layout. Since the front part was narrower, it could be drawn in between the wheels of the rear driving axle. Additionally, the firebox was of the Belpaire type to create a larger direct heating surface. 

The power plant was of the Du Bousquet-De Glehn type, i.e. a four-cylinder compound engine with outer high-pressure cylinders that acted on the second driving axle and inner low-pressure cylinders that acted on the first driving axle. The driving wheels had a diameter of only 1,850 mm in order to be able to maintain a high average speed even on hilly routes. This was primarily the line from Limoges to Toulouse, which had gradients of up to 1.05 percent. Later, the locomotives with the numbers 3501 to 3589 were developed, in which the driving wheels were 10 cm larger and intended for flatter lines.

The first 40 examples were built by SACM and Hanomag from 1907 and still worked with saturated steam. On the relatively flat line between Paris and Les Aubrais, they reached an average speed of 88 to 95 km/h with a trailing load of 360 tonnes. From 1908, 30 other very similar locomotives were built by ALCO in the USA. From 1910, the last 30 that were made by the SFCM followed. From the factory they had a superheater and an enlarged diameter for the high-pressure cylinders.

Between 1932 and 1934, André Chapelon rebuilt twelve locomotives to numbers 4701 to 4712, which had a 4-8-0 wheel arrangement and delivered more than 4,000 hp. Another 25 4-8-0 locomotives followed in 1940 and 1941, which the SNCF designated as 240 P 1 to 25. The non-rebuilt locomotives received innovations such as Kylchap exhaust systems, superheaters, feedwater heaters or smoke deflectors during their service life. They became the 4-231 A 501 to 600 on the SNCF and were retired by 1954.

No. 4546 built by ALCO at the Cité du Train in Mulhouse Hugh Llewelyn / CC BY-SA 2.0
View of the boiler with the special shape of the firebox Railway and Locomotive Engineering, September 1908

Technical data

General

Property 4501-4540 4541-4570 4571-4600
Built 1907-1908 1908-1909 1910-1914
Manufacturers SACM, Hanomag ALCO SFCM
Wheel arrangement 4-6-2 (Pacific)
Gauge 1,435 mm (Standard gauge)

Dimensions and weights

Property 4501-4540 4541-4570 4571-4600
Length 20.79 m 22.17 m
Length loco 13.41 m
Wheelbase 10.50 m
Empty mass 81.2 t
Service mass 90.4 t 88.5 t 92.2 t
Adhesion mass 52.3 t 55.3 t 52.7 t
Total mass 136.2 t 133.7 t 138.6 t
Rigid wheelbase 3.90 m
Water capacity 20,000 l
Fuel capacity 6 t (coal)

Boiler

Property 4501-4540 4541-4570 4571-4600
Grate area 4.27 m²
Firebox surface 17.14 m² 17.17 m² 15.37 m²
Tube heating surface 266.03 m² 266.1 m² 195.6 m²
Evaporative heating surface 283.17 m² 283.27 m² 210.97 m²
Total heating surface 283.2 m² 283.3 m² 274.5 m²
Superheater surface 63.5 m²

Power plant

Property 4501-4540 4541-4570 4571-4600
Driver diameter 1,850 mm
Boiler pressure 16 bar
Expansion type compound
Cylinders four, HP: 390 x 650 mm and LP: 640 x 650 mm four, HP: 420 x 650 mm and LP: 640 x 650 mm

Power

Property 4501-4540 4541-4570 4571-4600
Power source steam
Estimated power 1,300 kW (1,768 PS) 1,600 kW (2,175 PS)
Top speed 120 km/h
Starting effort 106.0 kN 117.8 kN
Starting effort simple 127.2 kN 141.4 kN

Calculated values

Property 4501-4540 4541-4570 4571-4600
Factor of adhesion 1 : 4.84 1 : 5.12 1 : 4.38
Optimal speed 76 km/h 84 km/h
Power-to-weight ratio 14.4 kW/t 14.7 kW/t 17.4 kW/t
Heating Surface Equivalent 368.9 m² 369.1 m² 414.8 m²
Cylinder volume/HSE 1 : 987.89 1 : 987.22 1 : 938.27
Adhesive weight/Total 1 : 1.73 1 : 1.60 1 : 1.75
Tractive force/Heating surface 1 : 7.82 1 : 8.97
Grate area/Heating surface 1 : 66.32 1 : 66.34 1 : 64.28
Firebox/Tube surface 1 : 15.52 1 : 15.50 1 : 12.73
Total/Superheater 1 : 3.32
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.