Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Hungarian State Railways and Košice–Bohumín Railway IIIq

Hungarian State Railways class 325 and Czechoslovak State Railways class 334.3

Austria-Hungary 1893 282 produced
PD

One of the locomotives which achieved the highest numbers in the Hungarian State Railways was the series IIIq 0-6-0 freight locomotive. It was considered the successor to the IIIe, but in contrast to this had an internal frame. Between 1893 and 1907, MÁV received 247, all of which were manufactured by MÁVAG. The KsOd also purchased 35 identical machines that were delivered between 1899 and 1909 and were also referred to as IIIq. At the MÁV they became the class 325 from 1911.

It was powered by a two-cylinder compound engine. To adapt to different requirements, a blastpipe with a variable cross-section was installed, with which the balance between the counter pressure of the cylinders and the draft could be changed. Due to its excessive complexity, this mechanism was later removed again.

Despite the overhanging cylinders and firebox and the resulting poorer running smoothness, these locomotives were also regularly used to transport passenger trains. After the First World War, 102 had to be given to Romania, 68 to Yugoslavia, nine to Czechoslovakia and three to Poland.

Technical data

General

Built
1893-1909
Manufacturers
MÁVAG
Wheel arrangement
0-6-0 (Six-coupled)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length
9.60 m
Wheelbase
3.50 m
Empty mass
38.3 t
Service mass
42.5 t
Adhesion mass
42.5 t
Rigid wheelbase
3.50 m
Axle load
14.2 t
Water capacity
12,500 l
Fuel capacity
6.8 t (coal)

Boiler

Grate area
2.1 m²
Firebox surface
8.8 m²
Tube heating surface
113.6 m²
Evaporative heating surface
122.4 m²
Total heating surface
122.4 m²

Power plant

Driver diameter
1,440 mm
Boiler pressure
13 bar
Expansion type
compound
Cylinders
two, HP: 485 x 650 mm and LP: 700 x 650 mm

Power

Power source
steam
Estimated power
400 kW (544 PS)
Top speed
60 km/h
Starting effort
79.3 kN
Starting effort simple
95.1 kN

Calculated values

Factor of adhesion
1 : 5.26
Optimal speed
31 km/h
Power-to-weight ratio
9.4 kW/t
Heating Surface Equivalent
166.4 m²
Cylinder volume/HSE
1 : 1,473.31
Adhesive weight/Total
1 : 1.00
Tractive force/Heating surface
1 : 13.53
Grate area/Heating surface
1 : 58.29
Firebox/Tube surface
1 : 12.91
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.