Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

North Eastern class 1001

Great Britain 1852 192 produced
Locomotive Magazine, July 1903

The class 1001 were 0-6-0 goods locomotives designed by William Bouch and purchased by the North Eastern beginning in 1852. They were of the long boiler design popular in the 1840s, designed to lower the center of gravity. The long and thin boiler had overhang both on the smokebox and firebox ends, but this was no great problem for a slow goods locomotive. The small firebox was also well suited for operations where high power was only required for short periods of time. The steam supply of the boiler could be used up when accelerating and then refilled.

The production ran for a period of 23 years. The total of 192 came partly from the North Eastern's own workshops in Darlington and Shildon, others were sourced from several companies. The first locomotives were built without a cab and later retrofitted with one. As part of further modernization, larger tenders were also attached. The last locomotives built in the 1870s were withdrawn by 1923.

No. 1275 in National Railway Museum in York Tony Hisgett / CC BY 2.0

Technical data

General

Built
1852-1875
Manufacturers
Darlington, Shildon, Dübs & Co., Avonside
Wheel arrangement
0-6-0 (Six-coupled)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Wheelbase
3.61 m
Total wheelbase
11.02 m
Service mass
35.8 t
Adhesion mass
35.8 t
Total mass
58.2 t
Rigid wheelbase
3.61 m
Axle load
14.3 t
Water capacity
7,276 l

Boiler

Grate area
1.236 m²
Firebox surface
8.594 m²
Tube heating surface
114.201 m²
Evaporative heating surface
122.795 m²
Total heating surface
122.8 m²

Power plant

Driver diameter
1,537 mm
Boiler pressure
9.7 bar
Expansion type
simple expansion
Cylinders
two, 432 x 660 mm

Power

Power source
steam
Estimated power
261 kW (355 PS)
Starting effort
65.7 kN

Calculated values

Factor of adhesion
1 : 5.34
Optimal speed
24 km/h
Power-to-weight ratio
7.3 kW/t
Heating Surface Equivalent
165.8 m²
Cylinder volume/HSE
1 : 1,166.81
Adhesive weight/Total
1 : 1.00
Tractive force/Heating surface
1 : 11.18
Grate area/Heating surface
1 : 99.35
Firebox/Tube surface
1 : 13.29
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.