Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Alsace-Lorraine S 12

French State Railway 1-231 A 301 to 304 and 306 to 308 and Luxembourg Railways No. 3711 to 3713

Germany 1908 8 produced
Die Lokomotive, June 1909

In order to obtain a more powerful express locomotive than those with the 4-6-0 wheel arrangement, the Reichseisenbahnen in Alsace-Lorraine had some of the first Pacifics built in Europe in 1908. However, in order to be able to use existing turntables and at the same time allow a large tender, the trailing axle had a very small distance from the third driving axle. 

This meant that the Belpaire firebox had to be moved between the driving wheels, so the G 12 was not one of the typical Pacifics with a wide firebox. Typical of French-influenced areas, they had four cylinders based on the de Glehn system. Other features included serve tubes in the boiler and an exhaust system with a variable cross-section and cloverleaf shape.

Since the boiler and firebox were too small compared to other Pacifics and ten-wheelers, only eight S 12 were built. The seven that remained after the First World War came to SNCF in 1938 as 1-231 A. After the Second World War, three came to Luxembourg, two to the GDR and two to Poland. While they were used in Luxembourg until 1950 and in the GDR until 1953, the two in Poland were decommissioned in 1946 without actually being used.

Technical data

General

Built
1908
Manufacturers
Grafenstaden
Wheel arrangement
4-6-2 (Pacific)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length
21.50 m
Wheelbase
10.35 m
Empty mass
75.5 t
Service mass
82.6 t
Adhesion mass
48 t
Total mass
130.9 t
Rigid wheelbase
4.30 m
Axle load
16 t
Water capacity
21,000 l
Fuel capacity
6 t (coal)

Boiler

Grate area
3.22 m²
Firebox surface
17.38 m²
Tube heating surface
182.83 m²
Evaporative heating surface
200.21 m²
Superheater surface
38.5 m²
Total heating surface
238.7 m²

Power plant

Driver diameter
2,040 mm
Boiler pressure
15 bar
Expansion type
compound
Cylinders
four, HP: 380 x 660 mm and LP: 600 x 660 mm

Power

Power source
steam
Estimated power
1,000 kW (1,360 PS)
Top speed
100 km/h
Starting effort
85.0 kN
Starting effort simple
102.0 kN

Calculated values

Factor of adhesion
1 : 5.54
Optimal speed
72 km/h
Power-to-weight ratio
12.1 kW/t
Heating Surface Equivalent
364.1 m²
Cylinder volume/HSE
1 : 923.66
Adhesive weight/Total
1 : 1.72
Tractive force/Heating surface
1 : 7.44
Grate area/Heating surface
1 : 74.13
Firebox/Tube surface
1 : 10.52
Total/Superheater
1 : 5.20
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.