Toledo & Ohio Central class G-95a
United States 1902 25 produced
The Toledo & Ohio Central, a subsidiary of the New York Central, procured a total of 25 consolidations from the Rogers Locomotive and Machine Works in 1902 and 1903. With a driver diameter of just 54 inches, they were downright freight machines. Deliveries included 20 in 1902 and another five in 1903.
The locomotives had a boiler that tapers towards the front and a Belpaire firebox. The leading axle was connected to the first driving axle by means of a compensating lever, as were the three rear driving axles to each other. The second driving axle was designed without wheel flanges in order to be able to better run through curves.
Technical data
General
- Built
- 1902-1903
- Manufacturers
- Rogers
- Wheel arrangement
- 2-8-0 (Consolidation)
- Gauge
- 1,435 mm (Standard gauge)
Dimensions and weights
- Wheelbase
- 7.01 m
- Total wheelbase
- 15.48 m
- Service mass
- 70.9 t
- Adhesion mass
- 63.8 t
- Total mass
- 118.4 t
- Rigid wheelbase
- 4.57 m
- Axle load
- 16 t
- Water capacity
- 18,927 l
- Fuel capacity
- 9.1 t (coal)
Boiler
- Grate area
- 2.819 m²
- Firebox surface
- 15.398 m²
- Tube heating surface
- 163.513 m²
- Evaporative heating surface
- 178.911 m²
- Total heating surface
- 178.9 m²
Power plant
- Driver diameter
- 1,372 mm
- Boiler pressure
- 12.4 bar
- Expansion type
- simple expansion
- Cylinders
- two, 508 x 660 mm
Power
- Power source
- steam
- Estimated power
- 652 kW (886 PS)
- Starting effort
- 131.1 kN
Calculated values
- Factor of adhesion
- 1 : 4.78
- Optimal speed
- 31 km/h
- Power-to-weight ratio
- 9.2 kW/t
- Heating Surface Equivalent
- 255.9 m²
- Cylinder volume/HSE
- 1 : 1,046.12
- Adhesive weight/Total
- 1 : 1.11
- Tractive force/Heating surface
- 1 : 15.30
- Grate area/Heating surface
- 1 : 63.47
- Firebox/Tube surface
- 1 : 10.62
