Paris-Orléans E 1 to E 13
French State Railway BB 1280
In order to be able to take traffic further into the center of Paris, the PO built a new line around 1900, some of which ran underground. Operation here was under 600 V direct current, partly via third rail and partly via an overhead line. In manufacturing the locomotives, support was sought from General Electric, which had already supplied technology for the Baltimore Belt Line.
The eight locomotives built first were of the steeplecab type with a central driver's cab. Seven of these were converted from 70 to 100 km/h in 1904. After further sections were electrified, a further five were built by 1912, which had two cabs and a central luggage compartment. After the 1,500 V system had established, they were converted to this system. Later, half of them were further converted into shunting locomotives with a top speed of 50 km/h and significantly lower power. Their withdrawals took place between 1965 and 1967.
Technical data
General
| Property | E 1-E 8 | E 9-E 13 | converted to 1.500 V | rebuilt as shunter |
|---|---|---|---|---|
| Built | 1900-1904 | 1905-1912 | 1930-1935 | |
| Manufacturers | mechanical part: Blanc-Misseron, electrical part: General Electric | |||
| Wheel arrangement | B-B | |||
| Gauge | 1,435 mm (Standard gauge) | |||
Dimensions and weights
| Property | E 1-E 8 | E 9-E 13 | converted to 1.500 V | rebuilt as shunter |
|---|---|---|---|---|
| Length | 10.61 m | 11.37 m | ||
| Service mass | 46 t | 53 t | 54.6 t | 64 t |
| Adhesion mass | 46 t | 53 t | 54.6 t | 64 t |
| Rigid wheelbase | 2.39 m | |||
| Axle load | 11.5 t | 13.3 t | 13.7 t | 15 t |
Power
| Property | E 1-E 8 | E 9-E 13 | converted to 1.500 V | rebuilt as shunter |
|---|---|---|---|---|
| Power source | electric - DC | |||
| Hourly power | 680 kW (925 PS) | 140 kW (190 PS) | ||
| Continuous power | 500 kW (680 PS) | 103 kW (140 PS) | ||
| Top speed | 70 km/h | 100 km/h | 50 km/h | |
Calculated values
| Property | E 1-E 8 | E 9-E 13 | converted to 1.500 V | rebuilt as shunter |
|---|---|---|---|---|
| Power-to-weight ratio | 14.8 kW/t | 12.8 kW/t | 12.5 kW/t | 2.2 kW/t |
| Adhesive weight/Total | 1 : 1.00 | |||