Alsace-Lorraine A 18
Alsace-Lorraine S 5
The A 18, later called S 5, was a 4-4-0 express locomotive that had been ordered when it became evident that the A 15 and A 16 (the later S 3) were not powerful enough for the growing demands. Like its predecessors it was a compound, but had four cylinders arranged after the de Glehn system. In large parts it was identical to the de Glehn variant of the Prussian S 51, but had changes in detail like a boiler pressure increased by one bar and a common cover for safety valves and whistle.
50 were built between 1902 and 1904 and only four followed in 1913. 34 had rifled Serve tubes, while the others had conventional ones. The locomotives were named after rivers and were used in light and medium express service with train weights up to 240 tonnes and usual speeds around 80 or 90 km/h. After World War I two remained in Germany and the others were used by the AL until 1937.
Technical data
General
| Property | normal tubes | Serve tubes |
|---|---|---|
| Built | 1902-1904, 1913 | |
| Manufacturers | Grafenstaden | |
| Wheel arrangement | 4-4-0 (American) | |
| Gauge | 1,435 mm (Standard gauge) | |
Dimensions and weights
| Property | normal tubes | Serve tubes |
|---|---|---|
| Length | 17.40 m | |
| Length loco | 10.20 m | |
| Service mass | 55.6 t | |
| Adhesion mass | 32 t | |
| Total mass | 76.6 t | |
| Axle load | 16 t | |
| Water capacity | 18,000 l | |
| Fuel capacity | 5 t (coal) | |
Boiler
| Property | normal tubes | Serve tubes |
|---|---|---|
| Grate area | 2.28 m² | |
| Firebox surface | 11.35 m² | |
| Tube heating surface | 110.61 m² | 158.5 m² |
| Evaporative heating surface | 121.96 m² | 169.85 m² |
| Total heating surface | 122.0 m² | 169.9 m² |
Power plant
| Property | normal tubes | Serve tubes |
|---|---|---|
| Driver diameter | 1,980 mm | |
| Boiler pressure | 15 bar | |
| Expansion type | compound | |
| Cylinders | four, HP: 340 x 640 mm and LP: 530 x 640 mm | |
Power
| Property | normal tubes | Serve tubes |
|---|---|---|
| Power source | steam | |
| Estimated power | 600 kW (816 PS) | 650 kW (884 PS) |
| Top speed | 100 km/h | |
| Starting effort | 67.5 kN | |
| Starting effort simple | 81.0 kN | |
Calculated values
| Property | normal tubes | Serve tubes |
|---|---|---|
| Factor of adhesion | 1 : 4.65 | |
| Optimal speed | 55 km/h | 60 km/h |
| Power-to-weight ratio | 10.8 kW/t | 11.7 kW/t |
| Heating Surface Equivalent | 178.7 m² | 226.6 m² |
| Cylinder volume/HSE | 1 : 1,440.38 | 1 : 1,135.96 |
| Adhesive weight/Total | 1 : 1.74 | |
| Tractive force/Heating surface | 1 : 11.56 | 1 : 8.30 |
| Grate area/Heating surface | 1 : 53.49 | 1 : 74.50 |
| Firebox/Tube surface | 1 : 9.75 | 1 : 13.96 |