Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Bavarian B XI

German Reichsbahn class 367-8

Germany 1892 139 produced
No. 1316 PD

Shortly after the express locomotives of type X were put into service, it was noticed that the power could not be further increased while maintaining the 2-4-0 wheel arrangement. For this reason, a new locomotive was developed that had a bogie that could be moved sideways at the front and could therefore accommodate a larger boiler without exceeding the axle load. The first series consisted of 39 machines, which were delivered by Maffei in 1892 and 1893. They were powered by a simpe two-cylinder engine and could reach a top speed of 90 km/h with a 1,870 mm driver diameter. 

A second series was produced from 1895, of which a total of 100 machines were manufactured not only by Maffei but also by Krauss. Their biggest difference to the first was that they got a compound engine with two cylinders to achieve better efficiency. In addition, the boiler pressure was increased from 12 to 13 bars. On the flat, the two versions could haul 200 and 270 tonnes, respectively, at 75 km/h. In order to be able to maintain a speed of 50 km/h on gradients of 0.5 percent, the train weight was not allowed to exceed 200 or 260 tonnes.

Despite the early appearance of more powerful and, above all, faster locomotives, a large number of the machines were able to survive until the Reichsbahn era, even if they were rarely used in high-value express train service later on. Eight examples of the first series and 76 of the second series were taken over by the Reichsbahn and given the numbers 36 701 to 708 and 36 751 to 826. The simple locomotives were all retired in 1926 and the compound locomotives by 1931.

Technical data

General

Property No. 1201-1239 No. 1240-1339
Built 1892-1893 1895-1900
Manufacturers Maffei, Krauss
Wheel arrangement 4-4-0 (American)
Gauge 1,435 mm (Standard gauge)

Dimensions and weights

Property No. 1201-1239 No. 1240-1339
Length 15.98 m 16.89 m
Wheelbase 6.67 m
Service mass 50.4 t 51.5 t
Adhesion mass 28.5 t 29.6 t
Total mass 86.4 t 94.5 t
Rigid wheelbase 2.55 m
Axle load 14.3 t 14.8 t
Water capacity 14,500 l 18,000 l
Fuel capacity 6 t (coal) 6.5 t (coal)

Boiler

Property No. 1201-1239 No. 1240-1339
Grate area 2.24 m² 2.26 m²
Evaporative heating surface 116.2 m² 116.8 m²
Total heating surface 116.2 m² 116.8 m²

Power plant

Property No. 1201-1239 No. 1240-1339
Driver diameter 1,870 mm
Boiler pressure 12 bar 13 bar
Expansion type compound
Cylinders two, 430 x 610 mm two, HP: 455 x 610 mm and LP: 670 x 610 mm

Power

Property No. 1201-1239 No. 1240-1339
Power source steam
Estimated power 450 kW (612 PS)
Top speed 90 km/h
Starting effort 61.5 kN 51.1 kN
Starting effort simple 73.8 kN 61.3 kN

Calculated values

Property No. 1201-1239 No. 1240-1339
Factor of adhesion 1 : 4.54 1 : 5.69
Optimal speed 45 km/h 53 km/h
Power-to-weight ratio 8.9 kW/t 8.7 kW/t
Adhesive weight/Total 1 : 1.77 1 : 1.74
Tractive force/Heating surface 1 : 11.06 1 : 9.13
Grate area/Heating surface 1 : 51.88 1 : 51.68
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.