Delaware & Hudson class U-II
Delaware & Hudson class E-1a
The locomotives later grouped together as class E-1 comprised ten Camelback Consolidations acquired by the Delaware & Hudson in 1898 and 1899 for burning culm anthracite. The first three were rebuilt from one existing 4-4-0 and two 2-6-0 locomotives. The remaining five were newly constructed by Dickson and were initially classified as U-II before being redesignated E-1a.
Their wide Wootten fireboxes provided a grate area of 80.3 square feet. In addition to 170 square feet of direct radiant heating surface, the firebox contained a further 104 square feet in the so-called water bars. One locomotive was built as a compound, using comparatively large cylinders measuring 23 and 34 inches in diameter. It was later converted to simple expansion. This locomotive and the remaining members of the E-1 and E-1a classes were scrapped between 1927 and 1928.
Technical data
General
- Built
- 1898
- Manufacturers
- Dickson
- Wheel arrangement
- 2-8-0 (Consolidation)
- Gauge
- 1,435 mm (Standard gauge)
Dimensions and weights
- Wheelbase
- 7.06 m
- Total wheelbase
- 15.55 m
- Service mass
- 68.1 t
- Adhesion mass
- 61 t
- Total mass
- 106.4 t
- Rigid wheelbase
- 4.98 m
- Axle load
- 15.3 t
- Water capacity
- 15,142 l
- Fuel capacity
- 6.4 t (coal)
Boiler
- Grate area
- 7.46 m²
- Firebox surface
- 25.455 m²
- Tube heating surface
- 159.05 m²
- Evaporative heating surface
- 184.506 m²
- Total heating surface
- 184.5 m²
Power plant
- Driver diameter
- 1,422 mm
- Boiler pressure
- 12.4 bar
- Expansion type
- simple expansion
- Cylinders
- two, 508 x 660 mm
Power
- Power source
- steam
- Estimated power
- 1,119 kW
- Starting effort
- 126.4 kN
Calculated values
- Factor of adhesion
- 1 : 4.74
- Optimal speed
- 55 km/h
- Power-to-weight ratio
- 16.4 kW/t
- Heating Surface Equivalent
- 311.8 m²
- Cylinder volume/HSE
- 1 : 858.63
- Adhesive weight/Total
- 1 : 1.12
- Tractive force/Heating surface
- 1 : 14.31
- Grate area/Heating surface
- 1 : 24.73
- Firebox/Tube surface
- 1 : 6.25