Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Reading Company class T-1

United States 1945 30 produced
No. 2100 in September 1964 Roger Puta

Since the Reading Company was not allowed to build new locomotive types during World War II due to the War Production Board's regulations, existing locomotives had to be rebuilt. The class T-1 was created by rebuilding a total of 30 class I-10sa Consolidations to the 4-8-4 wheel arrangement. Among other things, the boiler with Wootten firebox were taken over and enlarged.

The first 20 locomotives were intended only for freight service and only had roller bearings on the carrying axles. Only in the last ten were roller bearings used on all axles in order to be suitable for possible use in front of passenger trains. In fact, they were rarely used in passenger service, but mostly in front of fast freight trains.

Their regular use initially ended in 1954. However, as traffic volumes increased, Reading used some of these machines again and also rented nine to the PRR. After these operations ended in 1957, the Reading ran a series of special trips with four locomotives that lasted until 1964 and became known as the "Iron Horse Rambles". The four locomotives used for this are all preserved today, of which only 2102 is operational.

Technical data

General

Built
1945-1947
Manufacturers
Reading
Wheel arrangement
4-8-4 (Northern)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Wheelbase
13.97 m
Service mass
200.2 t
Adhesion mass
126.2 t
Total mass
367 t
Rigid wheelbase
5.87 m
Axle load
31.6 t
Water capacity
71,923 l
Fuel capacity
23.6 t (coal)

Boiler

Grate area
8.77 m²
Firebox surface
43.2 m²
Tube heating surface
413.883 m²
Evaporative heating surface
457.083 m²
Superheater surface
112.784 m²
Total heating surface
569.9 m²

Power plant

Driver diameter
1,778 mm
Boiler pressure
16.5 bar
Expansion type
simple expansion
Cylinders
two, 686 x 813 mm

Power

Power source
steam
Estimated power
3,729 kW (5,070 PS)
Starting effort
302.4 kN

Calculated values

Factor of adhesion
1 : 4.09
Optimal speed
76 km/h
Power-to-weight ratio
18.6 kW/t
Heating Surface Equivalent
898.7 m²
Cylinder volume/HSE
1 : 668.20
Adhesive weight/Total
1 : 1.59
Tractive force/Heating surface
1 : 11.08
Grate area/Heating surface
1 : 64.98
Firebox/Tube surface
1 : 9.58
Total/Superheater
1 : 4.05
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.