Reading Company class T-1
Since the Reading Company was not allowed to build new locomotive types during World War II due to the War Production Board's regulations, existing locomotives had to be rebuilt. The class T-1 was created by rebuilding a total of 30 class I-10sa Consolidations to the 4-8-4 wheel arrangement. Among other things, the boiler with Wootten firebox were taken over and enlarged.
The first 20 locomotives were intended only for freight service and only had roller bearings on the carrying axles. Only in the last ten were roller bearings used on all axles in order to be suitable for possible use in front of passenger trains. In fact, they were rarely used in passenger service, but mostly in front of fast freight trains.
Their regular use initially ended in 1954. However, as traffic volumes increased, Reading used some of these machines again and also rented nine to the PRR. After these operations ended in 1957, the Reading ran a series of special trips with four locomotives that lasted until 1964 and became known as the "Iron Horse Rambles". The four locomotives used for this are all preserved today, of which only 2102 is operational.
Technical data
General
- Built
- 1945-1947
- Manufacturers
- Reading
- Wheel arrangement
- 4-8-4 (Northern)
- Gauge
- 1,435 mm (Standard gauge)
Dimensions and weights
- Wheelbase
- 13.97 m
- Service mass
- 200.2 t
- Adhesion mass
- 126.2 t
- Total mass
- 367 t
- Rigid wheelbase
- 5.87 m
- Axle load
- 31.6 t
- Water capacity
- 71,923 l
- Fuel capacity
- 23.6 t (coal)
Boiler
- Grate area
- 8.77 m²
- Firebox surface
- 43.2 m²
- Tube heating surface
- 413.883 m²
- Evaporative heating surface
- 457.083 m²
- Superheater surface
- 112.784 m²
- Total heating surface
- 569.9 m²
Power plant
- Driver diameter
- 1,778 mm
- Boiler pressure
- 16.5 bar
- Expansion type
- simple expansion
- Cylinders
- two, 686 x 813 mm
Power
- Power source
- steam
- Estimated power
- 3,729 kW (5,070 PS)
- Starting effort
- 302.4 kN
Calculated values
- Factor of adhesion
- 1 : 4.09
- Optimal speed
- 76 km/h
- Power-to-weight ratio
- 18.6 kW/t
- Heating Surface Equivalent
- 898.7 m²
- Cylinder volume/HSE
- 1 : 668.20
- Adhesive weight/Total
- 1 : 1.59
- Tractive force/Heating surface
- 1 : 11.08
- Grate area/Heating surface
- 1 : 64.98
- Firebox/Tube surface
- 1 : 9.58
- Total/Superheater
- 1 : 4.05