Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Imperial-Royal State Railways class 73

Polish State Railways Tp15, Czechoslovak State Railways class 414.0, and Italian State Railway class 424

Austria-Hungary 1885 454 produced
Two units double-headed with a freight train consisting of 28 cars Stanislaw I. Witkiewicz PD

After the four class 76 freight locomotives had been put into service on the Arlberg in 1884, the class 73 shown here was introduced only one year later. The new locomotive was also a 0-8-0, but had smaller cylinders and produced around 700 hp. As the first batches were built for the Arlberg Railway, they were just called “Arlberg type”. Soon they were also built for the Galician Transversal Railway and many other lines.

Between 1885 and 1909, a total of 454 were delivered by several manufacturers. On the flat, they could haul 1,650 tonnes at 30 km/h. A speed of 15 km/h could be attained either with 580 tonnes at a one percent grade or with 220 tonnes at 2.5 percent. When faster and more powerful 2-8-0 and 0-10-0 locomotives were introduced, the class 73 was increasingly used for shunting service.

After World War I, only 44 stayed with the BBÖ. 233 locomotives, more than a half of the original production, came to Poland and became PKP Tp15. 119 became class 414.0 of the ČSD, 25 came to Italy, 17 to Romania and four to the future Yugoslavia. In 1938, the Austrian locomotives became Reichsbahn class 5557. After the war, 38 were used by the ÖBB as class 55 until 1964. The ČSD retired the last one in 1969. 414.096 was preserved and is operational again since 2019.

Technical data

General

Property as built increased boiler pressure
Built 1885-1909
Manufacturers Wiener Neustadt, Floridsdorf, Krauss Linz, StEG, &#268, KD
Wheel arrangement 0-8-0 (Eight-coupled)
Gauge 1,435 mm (Standard gauge)

Dimensions and weights

Property as built increased boiler pressure
Length 16.48 m
Wheelbase 3.90 m
Total wheelbase 11.64 m
Empty mass 47.5 t
Service mass 55.1 t
Adhesion mass 55.1 t
Rigid wheelbase 2.55 m
Water capacity 12,000 l
Fuel capacity 7.2 t (coal)

Boiler

Property as built increased boiler pressure
Grate area 2.25 m²
Firebox surface 11.2 m² 11.21 m²
Tube heating surface 170.8 m²
Evaporative heating surface 182 m²
Total heating surface 182.0 m²

Power plant

Property as built increased boiler pressure
Driver diameter 1,100 mm
Boiler pressure 10 bar 11 bar
Expansion type simple expansion
Cylinders two, 500 x 570 mm

Power

Property as built increased boiler pressure
Power source steam
Estimated power 525 kW (714 PS) 550 kW (748 PS)
Top speed 35 km/h
Starting effort 110.1 kN 121.1 kN

Calculated values

Property as built increased boiler pressure
Factor of adhesion 1 : 4.91 1 : 4.46
Optimal speed 29 km/h 27 km/h
Power-to-weight ratio 9.5 kW/t 10.0 kW/t
Heating Surface Equivalent 238.0 m² 238.1 m²
Cylinder volume/HSE 1 : 940.50 1 : 940.26
Adhesive weight/Total 1 : 1.00
Tractive force/Heating surface 1 : 12.64 1 : 13.90
Grate area/Heating surface 1 : 80.89
Firebox/Tube surface 1 : 15.25 1 : 15.24

Topics

  • steam locomotive
  • freight
CompareComment
Last changed: 08/2024

Watch on YouTube

Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.