Banner
Navigation
loco-info.com
The reference for locomotives and railcars

War Department Austerity 2-10-0

British Rail Standard class 8F, Dutch Railways series 5000, Syrian Railway class 150.6, and Greek State Railway class Λβ

Great Britain 1943 150 produced
NS 5009 in Utrecht in the year 1947 Het Utrechts Archief / NS 5009 (Ex-WD locomotive No. 73669) in Utrecht CC BY-SA 4.0

Similar to the German class 52, the 2-10-0 from the British War Department's austerity program was a ten-coupled, light-footed goods locomotive for use in World War II. It shared cylinders with the Austerity 2-8-0, but featured an additional driving axle. Due to the same driver diameter, the length of the locomotive was increased and the weight increased by about eight tons, but the axle load fell to 13 tons 9 cwt. While the firebox on the 2-8-0 was located between the wheels of the two rear driving axles, on the 2-10-0 it was shorter, wider and positioned above the wheels.

Of the 150 built, the majority saw service in France after D-Day to support the British Army. 20 of the first batch had already been delivered to the Middle East for the same task. After the end of the war, most of them stayed abroad. A total of 103 came from France to the Netherlands and were used there by the NS as class 5000. Four remained in Syria as class 150.6 of the CFS and 16 in Greece as class Λβ of the SEK. Eight survived in Greece in varying condition, two of which were later returned to the UK.

In Britain, British Railways bought 25 from the War Department in 1948 and used them in Scotland. They were treated by BR like standard locomotives and classified in the second highest powerclass 8F. Since their power was roughly similar to the Austerity 2-8-0, which was available in larger numbers, both types were used together. From 1957 another one from the Longmoor Military Railway joined them. All remained in service until May 1961, but the vast majority were withdrawn in December 1962.

Technical data

General

Built
1943-1945
Manufacturers
North British
Wheel arrangement
2-10-0 (Decapod)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length
20.58 m
Wheelbase
9.04 m
Total wheelbase
17.40 m
Service mass
79.6 t
Adhesion mass
69.6 t
Total mass
135.9 t
Rigid wheelbase
6.40 m
Axle load
13.7 t
Water capacity
22,731 l
Fuel capacity
9.1 t (coal)

Boiler

Grate area
3.716 m²
Firebox surface
17.837 m²
Tube heating surface
163.417 m²
Evaporative heating surface
181.254 m²
Superheater surface
39.298 m²
Total heating surface
220.6 m²

Power plant

Driver diameter
1,435 mm
Boiler pressure
15.5 bar
Expansion type
simple expansion
Cylinders
two, 483 x 711 mm

Power

Power source
steam
Estimated power
1,268 kW (1,724 PS)
Starting effort
152.2 kN

Calculated values

Factor of adhesion
1 : 4.49
Optimal speed
51 km/h
Power-to-weight ratio
15.9 kW/t
Heating Surface Equivalent
349.0 m²
Cylinder volume/HSE
1 : 745.45
Adhesive weight/Total
1 : 1.14
Tractive force/Heating surface
1 : 14.41
Grate area/Heating surface
1 : 59.35
Firebox/Tube surface
1 : 9.16
Total/Superheater
1 : 4.61
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.