War Department Austerity 2-10-0
British Rail Standard class 8F, Dutch Railways series 5000, Syrian Railway class 150.6, and Greek State Railway class Λβ
Similar to the German class 52, the 2-10-0 from the British War Department's austerity program was a ten-coupled, light-footed goods locomotive for use in World War II. It shared cylinders with the Austerity 2-8-0, but featured an additional driving axle. Due to the same driver diameter, the length of the locomotive was increased and the weight increased by about eight tons, but the axle load fell to 13 tons 9 cwt. While the firebox on the 2-8-0 was located between the wheels of the two rear driving axles, on the 2-10-0 it was shorter, wider and positioned above the wheels.
Of the 150 built, the majority saw service in France after D-Day to support the British Army. 20 of the first batch had already been delivered to the Middle East for the same task. After the end of the war, most of them stayed abroad. A total of 103 came from France to the Netherlands and were used there by the NS as class 5000. Four remained in Syria as class 150.6 of the CFS and 16 in Greece as class Λβ of the SEK. Eight survived in Greece in varying condition, two of which were later returned to the UK.
In Britain, British Railways bought 25 from the War Department in 1948 and used them in Scotland. They were treated by BR like standard locomotives and classified in the second highest powerclass 8F. Since their power was roughly similar to the Austerity 2-8-0, which was available in larger numbers, both types were used together. From 1957 another one from the Longmoor Military Railway joined them. All remained in service until May 1961, but the vast majority were withdrawn in December 1962.
Technical data
General
- Built
- 1943-1945
- Manufacturers
- North British
- Wheel arrangement
- 2-10-0 (Decapod)
- Gauge
- 1,435 mm (Standard gauge)
Dimensions and weights
- Length
- 20.58 m
- Wheelbase
- 9.04 m
- Total wheelbase
- 17.40 m
- Service mass
- 79.6 t
- Adhesion mass
- 69.6 t
- Total mass
- 135.9 t
- Rigid wheelbase
- 6.40 m
- Axle load
- 13.7 t
- Water capacity
- 22,731 l
- Fuel capacity
- 9.1 t (coal)
Boiler
- Grate area
- 3.716 m²
- Firebox surface
- 17.837 m²
- Tube heating surface
- 163.417 m²
- Evaporative heating surface
- 181.254 m²
- Superheater surface
- 39.298 m²
- Total heating surface
- 220.6 m²
Power plant
- Driver diameter
- 1,435 mm
- Boiler pressure
- 15.5 bar
- Expansion type
- simple expansion
- Cylinders
- two, 483 x 711 mm
Power
- Power source
- steam
- Estimated power
- 1,268 kW (1,724 PS)
- Starting effort
- 152.2 kN
Calculated values
- Factor of adhesion
- 1 : 4.49
- Optimal speed
- 51 km/h
- Power-to-weight ratio
- 15.9 kW/t
- Heating Surface Equivalent
- 349.0 m²
- Cylinder volume/HSE
- 1 : 745.45
- Adhesive weight/Total
- 1 : 1.14
- Tractive force/Heating surface
- 1 : 14.41
- Grate area/Heating surface
- 1 : 59.35
- Firebox/Tube surface
- 1 : 9.16
- Total/Superheater
- 1 : 4.61