Banner
Navigation
loco-info.com
The reference for locomotives and railcars

East African class 59

Kenya 1955 34 produced
flickr/Historical Railway Images PD

The class 59 of the East African Railways wasn't only the most powerful and heaviest Garratt locomotive ever built for meter gauge, but most likely also heavier than all built for cape gauge and nearly as heavy as the heaviest standard gauge Garratts in Australia and the Soviet Union. They were designed to accelerate freight traffic on the 330 miles between Mombasa and Nairobi. While Mombasa is located on the coast, Nairobi's elevation is 1.661 m or 5.450 ft above sea level.

Their wheel arrangement 4-8-2+2-8-4 is also called “Double Mountain”, since it resembles two 4-8-2 “Mountain” locomotives coupled back to back. In fact, the 34 locomotives built by Beyer-Peacock in 1955 were named after mountains. Their task was to haul 1,200 ton trains up long inclines of 1.5 percent. When needed, they also had to take over express trains with 35 coaches.

For the whole of their lives, they operated on the same line. Many of their crews only consisted of Sikhs. These always kept their locomotive in the best and cleanest condition and decorated their cab in a special way. After all had been withdrawn between 1973 and 1980, No. 5918 “Mount Gelai” was overhauled at the Nairobi Railway Museum. Until 2005, it wasn't only used to haul excursion trains, but sometimes even had to stand in when there was a shortage of diesel locomotives.

Technical data

General

Built
1955
Manufacturers
Beyer, Peacock & Co.
Wheel arrangement
4-8-2+2-8-4T (Double Mountain (Garratt))
Gauge
1,000 mm (Meter gauge)

Dimensions and weights

Length
31.37 m
Wheelbase
28.21 m
Service mass
255.7 t
Adhesion mass
162.1 t
Rigid wheelbase
4.57 m
Axle load
21.3 t
Water capacity
32,555 l
Fuel capacity
12,276 l (oil)

Boiler

Grate area
6.689 m²
Firebox surface
22.947 m²
Tube heating surface
307.788 m²
Evaporative heating surface
330.735 m²
Superheater surface
69.399 m²
Total heating surface
400.1 m²

Power plant

Driver diameter
1,372 mm
Boiler pressure
15.5 bar
Expansion type
simple expansion
Cylinders
four, 521 x 711 mm

Power

Power source
steam
Estimated power
2,013 kW (2,737 PS)
Top speed
69 km/h
Starting effort
370.8 kN

Calculated values

Factor of adhesion
1 : 4.29
Optimal speed
34 km/h
Power-to-weight ratio
7.9 kW/t
Heating Surface Equivalent
584.3 m²
Cylinder volume/HSE
1 : 1,036.82
Adhesive weight/Total
1 : 1.58
Tractive force/Heating surface
1 : 19.35
Grate area/Heating surface
1 : 59.82
Firebox/Tube surface
1 : 13.41
Total/Superheater
1 : 4.77

Topics

  • steam locomotive
  • freight
  • Garratt
CompareComment
Last changed: 09/2024

Watch on YouTube

Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.