Banner
Navigation
loco-info.com
The reference for locomotives and railcars

South Eastern & Chatham class H

Great Britain 1904 66 produced
No. 263 in April 2018 at Sheffield Park railway station PeterSkuce CC BY-SA 4.0

When the South Eastern & Chatham needed new suburban tank locomotives for the south of London, Harry Wainwright used the existing 0-4-4T locomotives of the SECR's constituents as an inspiration. These were the SER's class Q and the LCDR's classes R and R1. To be specific, he used the R1 as basis for the development of the new class H.

Between 1904 and 1909, 64 were built by Ashford Works. After it was realized that actually two more had been ordered and only their parts manufactured, these two were completed in 1915. Most were used on ex-SER lines and only the 13 which were used on ex-LCDR lines had an additional Westinghouse brake. The boiler designed for the class H was later also used for rebuilding other classes.

All went to the Southern Railway and all but two were taken over by British Railways in 1948. In the following years, many of them were equipped for push-pull service and used on rural branch lines. Between 1952 and 1964, 64 were withdrawn. 31263, the last one to be withdrawn, was preserved and is owned by the Bluebell Railway since 2008, now in SECR livery and carrying the number 263.

Technical data

General

Built
1904-1909, 1915
Manufacturers
Ashford
Wheel arrangement
0-4-4T (Forney)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length
10.03 m
Service mass
55.3 t
Adhesion mass
34.1 t
Axle load
17.1 t
Water capacity
6,136 l
Fuel capacity
1.5 t (coal)

Boiler

Grate area
1.549 m²
Firebox surface
9.499 m²
Tube heating surface
93.159 m²
Evaporative heating surface
102.658 m²
Total heating surface
102.7 m²

Power plant

Driver diameter
1,676 mm
Boiler pressure
11 bar
Expansion type
simple expansion
Cylinders
two, 457 x 660 mm

Power

Power source
steam
Estimated power
447 kW (608 PS)
Starting effort
77.2 kN

Calculated values

Factor of adhesion
1 : 4.34
Optimal speed
35 km/h
Power-to-weight ratio
8.1 kW/t
Heating Surface Equivalent
150.2 m²
Cylinder volume/HSE
1 : 1,444.13
Adhesive weight/Total
1 : 1.62
Tractive force/Heating surface
1 : 15.71
Grate area/Heating surface
1 : 66.27
Firebox/Tube surface
1 : 9.81
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.