Jura-Simplon and Swiss Federal Railways B 3/4
Dutch Railways series 3000
Between 1896 and 1902, the Jura-Simplon Railway got 75 2-6-0 locomotives for mixed traffic which had been built by the SLM. They were three-cylinder compounds where the single inside high-pressure cylinder drove the first driving axle and the two outside low-pressure cylinders drove the second driving axle. With a top speed of 75 km/h they also had to haul express trains in the mountains, but this task was taken over by the A 3/5 when this was introduced in 1902. After the founding of the SBB, 72 more were built between 1902 and 1907 which were nearly identical.
As early as in 1905, superheater technology was introduced with a modified design that had two cylinders with simple expansion and a boiler pressure that had been reduced from 14 to 12 bars. Most of the saturated compounds were retired starting in 1923 when electrification in Switzerland had been progressed. Only five which had been part of the war reserve were sold to the Netherlands in 1945 and became NS series 3000. Only a few of the superheated locomotives had been retired in the thirties, most followed in the fourties and fifties. The last one was No. 1367, which was retired in 1964 and is the only one that was preserved and still operational today.
Technical data
General
| Property | JS 301-375 | SBB 1676-1747 | SBB 1301-1369 |
|---|---|---|---|
| Built | 1896-1902 | 1902-1907 | 1905-1916 |
| Manufacturers | SLM | ||
| Wheel arrangement | 2-6-0 (Mogul) | ||
| Gauge | 1,435 mm (Standard gauge) | ||
Dimensions and weights
| Property | JS 301-375 | SBB 1676-1747 | SBB 1301-1369 |
|---|---|---|---|
| Length | 16.24 m | ||
| Wheelbase | 6.31 m | 6.40 m | |
| Total wheelbase | 12.36 m | 12.74 m | |
| Empty mass | 49.5 t | 50.4 t | 50.5 t |
| Service mass | 54.8 t | 56.4 t | 56.3 t |
| Adhesion mass | 44.5 t | 44.8 t | 45.1 t |
| Total mass | 83.8 t | 90.2 t | 90.1 t |
| Rigid wheelbase | 3.90 m | ||
| Axle load | 14.9 t | 15 t | 15.1 t |
| Water capacity | 11,700 l | 16,000 l | |
| Fuel capacity | 5 t (coal) | 6 t (coal) | |
Boiler
| Property | JS 301-375 | SBB 1676-1747 | SBB 1301-1369 |
|---|---|---|---|
| Grate area | 2.3 m² | ||
| Firebox surface | 12.3 m² | ||
| Tube heating surface | 116.2 m² | 99.6 m² | |
| Evaporative heating surface | 128.5 m² | 111.9 m² | |
| Total heating surface | 128.5 m² | 140.5 m² | |
| Superheater surface | 28.6 m² | ||
Power plant
| Property | JS 301-375 | SBB 1676-1747 | SBB 1301-1369 |
|---|---|---|---|
| Driver diameter | 1,520 mm | ||
| Boiler pressure | 14 bar | 12 bar | |
| Expansion type | compound | simple expansion | |
| Cylinders | three, HP: 500 x 600 mm and LP: 540 x 600 mm | two, 540 x 660 mm | |
Power
| Property | JS 301-375 | SBB 1676-1747 | SBB 1301-1369 |
|---|---|---|---|
| Power source | steam | ||
| Estimated power | 550 kW (748 PS) | ||
| Top speed | 75 km/h | ||
| Starting effort | 94.8 kN | 129.1 kN | |
| Starting effort simple | 113.8 kN | ||
| Indicated power | 722 kW (982 PS) | ||
Calculated values
| Property | JS 301-375 | SBB 1676-1747 | SBB 1301-1369 |
|---|---|---|---|
| Factor of adhesion | 1 : 4.60 | 1 : 4.63 | 1 : 3.43 |
| Optimal speed | 35 km/h | 34 km/h | |
| Power-to-weight ratio | 10.0 kW/t | 9.8 kW/t | 12.8 kW/t |
| Heating Surface Equivalent | 190.0 m² | 230.6 m² | |
| Cylinder volume/HSE | 1 : 1,472.50 | 1 : 1,310.97 | |
| Adhesive weight/Total | 1 : 1.23 | 1 : 1.26 | 1 : 1.25 |
| Tractive force/Heating surface | 1 : 15.41 | 1 : 19.20 | |
| Grate area/Heating surface | 1 : 55.87 | 1 : 61.09 | |
| Firebox/Tube surface | 1 : 9.45 | 1 : 8.10 | |
| Total/Superheater | 1 : 3.91 | ||