Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Lombardo-Venetian and Central Italian Railway Company No. 1 to 50

Austrian Southern Railway class 1, Rete Mediterranea No. 511 to 518, Rete Adriatica No. 31 to 52, and Italian State Railway class 102

Austria 1857 50 produced
No. 1 “Cerere” PD

Robert Stephenson & Co. delivered a total of 50 2-2-2 express locomotives to the “Lombardisch-venetianische und central-italenische Eisenbahn-Gesellschaft” (LVCI) in 1857 and 1858. These were largely identical in design to numbers 155 to 164, which had been supplied by Beyer-Peacock. Shortly afterwards, the newly founded Südbahn took over 15 of them and placed them in class 1.

After Austria-Hungary lost control of Veneto and Lombardy in 1866, the LVCI locomotives went to the Strade Ferrate Alta Italia (SFAI). In 1885 they were divided into eight in the Rete Mediterranea and 22 in the Rete Adriatica. Eleven that came to the RA had recently been rebuilt to the 2-4-0 wheel arrangement. When the Italian State Railways (FS) was founded in 1905, there were still four of them, which were classified in the class 102, some of which survived until 1908.

RA No. 1108, ex No. 39 “Cometa”, after being rebuilt as 2-4-0 Locomotive Magazine, September 1909

Technical data

General

Built
1857-1858
Manufacturers
Robert Stephenson & Co.
Wheel arrangement
2-2-2 (Jenny Lind)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length loco
7.48 m
Wheelbase
4.57 m
Empty mass
25.1 t
Service mass
27.6 t
Adhesion mass
13.2 t
Rigid wheelbase
4.57 m
Axle load
13.2 t

Boiler

Grate area
1.27 m²
Firebox surface
7.43 m²
Tube heating surface
92.22 m²
Evaporative heating surface
99.65 m²
Total heating surface
99.7 m²

Power plant

Driver diameter
1,880 mm
Boiler pressure
6 bar
Expansion type
simple expansion
Cylinders
two, 400 x 508 mm

Power

Power source
steam
Estimated power
160 kW (218 PS)
Starting effort
22.0 kN

Calculated values

Factor of adhesion
1 : 5.87
Optimal speed
45 km/h
Power-to-weight ratio
5.8 kW/t
Heating Surface Equivalent
136.8 m²
Cylinder volume/HSE
1 : 933.29
Adhesive weight/Total
1 : 2.09
Tractive force/Heating surface
1 : 4.62
Grate area/Heating surface
1 : 78.46
Firebox/Tube surface
1 : 12.41
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.