Banner
Navigation
loco-info.com
The reference for locomotives and railcars

South African class 25NC

South Africa 1953 137 produced
No. 3435 “H.J.L. du Toit” in December 1980 at De Aar Nicole Huhardeaux-Dufrasne CC BY-SA 2.0

The non-condensing class 25NC was built in parallel with the condensing class 25. Like this, it was designed by L.C. Grubb with engineering support from Krupp. Both had the same boiler with Melesco superheater and only the design of the smokebox differed in large parts. In both locomotives, the cylinders measured 24 by 28 inches and the drivers had a diameter of 60 inches. Many roller bearings were used in axles and rods.

Construction started in 1953 and was completed in 1955. Eleven came from North British and 39 from Henschel. The frames and cylinders of all locomotives were cast in one piece in the USA. In comparison with the condensing locomotives, the non-condensing variant had a tender with a considerably larger water capacity. The EW1 type tender had six axles, a mechanical stoker and carried 18 tons of coal and 10,500 imperial gallons of water.

Teething troubles of both classes included cracks in rods and bearings which had to be remedied by several modifications. Also, both had the problem that the Timken roller bearings on the crankpins tended to throw their lubricant onto the tires of the drivers, leading to increased slipping. These were later replaced by SKF bearings which solved this problem.

Between 1973 and 1980, 87 of the 90 class 25 locomotives were also rebuilt into the 25NC, resulting in a total number of 137. Their tenders lost their condensing apparatus and got an even larger cylindrical water tank of 11,200 imperial gallons. Due to their appearance, they were called “Worshond Tenders” after the Afrikaans name for the dachshund. The last built class 25NC, No. 3450, was rebuilt into the much more powerful class 26 “Red Devil” by David Wardale with gas producer combustion system from 1979. The rest of the class was withdrawn in the late eighties. Although there were negotiations with Zimbabwe which wanted to hire or buy some of them, these were not successful. Today 25 are being preserved, some of which are in working condition.

No. 3465 with “Worshond” tender, rebuilt from a condensing class 25 locomotive H.G. Graser

Technical data

General

Property EW1 tender EW2 tender
Built 1953-1955
Manufacturers Henschel, North British
Wheel arrangement 4-8-4 (Northern)
Gauge 1,067 mm (Cape gauge)

Dimensions and weights

Property EW1 tender EW2 tender
Length 27.90 m 32.77 m
Wheelbase 11.58 m
Rigid wheelbase 4.80 m
Total wheelbase 24.81 m 29.00 m
Service weight 119.3 t
Adhesive weight 75.4 t
Axle load 19 t
Total weight 226.6 t
Water capacity 47,734 l 50,918 l
Fuel capacity 18.3 t (coal) 19.3 t (coal)

Boiler

Property EW1 tender EW2 tender
Grate area 6.503 m²
Firebox surface 30.751 m²
Tube heating surface 284.191 m²
Evaporative heating surface 314.942 m²
Superheater surface 58.529 m²
Total heating surface 373.5 m²

Power plant

Property EW1 tender EW2 tender
Driver diameter 1,524 mm
Boiler pressure 15.5 bar
Expansion type simple expansion
Cylinders two, 610 x 711 mm

Power

Property EW1 tender EW2 tender
Power source steam
Estimated power 2,498 kW (3,396 PS)
Starting effort 228.7 kN

Calculated values

Property EW1 tender EW2 tender
Factor of adhesion 1 : 3.24
Optimal speed 68 km/h
Power-to-weight ratio 20.9 kW/t
Heating Surface Equivalent 585.8 m²
Cylinder volume/HSE 1 : 708.74
Adhesive weight/Total 1 : 1.58
Tractive force/Heating surface 1 : 12.79
Grate area/Heating surface 1 : 57.43
Firebox/Tube surface 1 : 9.24
Total/Superheater 1 : 5.38
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.