Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Baltimore & Ohio Davis Ten-Wheeler

United States 1869 110 produced

The Davis Ten-Wheeler was a 4-6-0 Camelback locomotive of the Baltimore & Ohio that was designed by J.C. Davis and stood in the tradition of the locomotives from Ross Winans. It was based on the Hayes Ten-Wheeler that was built from 1854. Like this, it had a long, narrow firebox for burning anthracite. Although the large cab was enclosed, the fireman had to walk out of it to access the firebox. The stack was a tall, parallel tube that was not located at the front of the smokebox, but far back directly in front of the cab.

While only 17 had been built of their predecessor, a total of 110 Davis Ten-Wheelers had been built between 1869 and 1873. They had come out of the Mount Claire Shops in Baltimore. Number 173, originally numbered 373, has survived until today and is one of only five remaining Camelbacks. It was donated to the Purdue University by the B&O in 1901 and 50 years later, it was again donated to the Museum of Transportation at St. Louis, Missouri. There it was on static display before the museum started to cosmetically restore it in 2017.

Technical data

General

Built
1869-1873
Manufacturers
Mount Clare
Wheel arrangement
4-6-0 (Ten-wheeler)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Wheelbase
9.25 m
Total wheelbase
13.56 m
Service mass
35 t
Adhesion mass
25.6 t
Total mass
58.6 t
Rigid wheelbase
2.69 m
Axle load
9.4 t
Water capacity
7,571 l
Fuel capacity
3.2 t (coal)

Boiler

Grate area
1.616 m²
Firebox surface
7.331 m²
Tube heating surface
102.016 m²
Evaporative heating surface
109.347 m²
Total heating surface
109.3 m²

Power plant

Driver diameter
1,270 mm
Boiler pressure
8.3 bar
Expansion type
simple expansion
Cylinders
two, 483 x 508 mm

Power

Power source
steam
Estimated power
261 kW (355 PS)
Starting effort
65.5 kN

Calculated values

Factor of adhesion
1 : 3.84
Optimal speed
24 km/h
Power-to-weight ratio
7.5 kW/t
Heating Surface Equivalent
146.0 m²
Cylinder volume/HSE
1 : 1,272.92
Adhesive weight/Total
1 : 1.36
Tractive force/Heating surface
1 : 12.51
Grate area/Heating surface
1 : 67.67
Firebox/Tube surface
1 : 13.92
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.