Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Ferrocarriles Nacionales Dewhurst Standard 4-8-0 “Docerruedas”

Colombia 1924 108 produced
Pacífico No. 37, built by Kitson Locomotive Magazine, February 1926

When several Colombian railways were unified under state control in 1924, P.C. Dewhurst designed a standard locomotive to be used on lines with three foot and meter gauge. They were 4-8-0 or twelve-wheelers, also called “Docerruedas”. They were produced between 1924 and 1951 by a total of seven manufacturers from the USA, Germany, Great Britain, Belgium and Czechoslovakia.

All had drivers with a diameter of 40 inches (1.245 mm) and a cylinder stroke of 22 inches (559 mm). The cylinder diameter varied from 17 to 18 1/4 inches (432 to 464 mm). To enable running through tight curves, the first driving axle had no flanges and the last one had an axlebox that allowed lateral movement and was self-centering. Also the bogie allowed ample lateral movement.

In total, 108 of these were delivered to several Colombian Railways which later became part of FCN. With more than 60, the Pacífico got the most. One picture shows number 37, one of the Kitson locomotives delivered to the Pacífico. It was named “Pedro del Ospina” and was one of the lightest at 111,000 pounds (50.3 t). Ambalema-Ibagué No. 10 was built by Baldwinin 1947 and had a weight of 131,500 pounds (59.6 t).

Ambalema-Ibagué No. 10, built by Baldwin Gustavo Arias de Greiff: La Segunda Mula de Hierro
Pacífico type by Kitson Gustavo Arias de Greiff: La Segunda Mula de Hierro
Norte type by Baldwin Gustavo Arias de Greiff: La Segunda Mula de Hierro

Technical data

General

Property Pacífico (Kitson) Norte (Baldwin)
Built 1924-1951
Manufacturers Baldwin, BMAG, Kitson & Co., Haine-Saint-Pierre, Hawthorn, Leslie & Co., Tubize, Škoda
Wheel arrangement 4-8-0 (Twelve-wheeler)
Gauge 914 mm (Three feet) 1,000 mm (Meter gauge)

Dimensions and weights

Property Pacífico (Kitson) Norte (Baldwin)
Wheelbase 6.50 m 6.68 m
Total wheelbase 14.02 m 14.50 m
Service mass 50.3 t 58.1 t
Adhesion mass 41.5 t 48.6 t
Total mass 80.7 t 90.1 t
Rigid wheelbase 2.29 m 2.39 m
Axle load 10.5 t 12.2 t
Water capacity 12,503 l
Fuel capacity 5.3 t (coal)

Boiler

Property Pacífico (Kitson) Norte (Baldwin)
Grate area 2.787 m² 3.029 m²
Firebox surface 9.105 m² 10.963 m²
Tube heating surface 97.92 m² 122.075 m²
Evaporative heating surface 107.024 m² 133.037 m²
Superheater surface 22.668 m² 28.335 m²
Total heating surface 129.7 m² 161.4 m²

Power plant

Property Pacífico (Kitson) Norte (Baldwin)
Driver diameter 1,016 mm
Boiler pressure 12.4 bar
Expansion type simple expansion
Cylinders two, 432 x 559 mm two, 457 x 559 mm

Power

Property Pacífico (Kitson) Norte (Baldwin)
Power source steam
Estimated power 708 kW (963 PS) 783 kW (1,065 PS)
Starting effort 108.2 kN 121.3 kN

Calculated values

Property Pacífico (Kitson) Norte (Baldwin)
Factor of adhesion 1 : 3.76 1 : 3.93
Optimal speed 40 km/h
Power-to-weight ratio 14.1 kW/t 13.5 kW/t
Heating Surface Equivalent 197.9 m² 244.5 m²
Cylinder volume/HSE 1 : 827.04 1 : 750.36
Adhesive weight/Total 1 : 1.21 1 : 1.20
Tractive force/Heating surface 1 : 17.42 1 : 15.70
Grate area/Heating surface 1 : 46.53 1 : 53.28
Firebox/Tube surface 1 : 10.75 1 : 11.14
Total/Superheater 1 : 4.72 1 : 4.70
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.