Anglo-Chilean Nitrate No. 97 to 102
Chile 1924 6 produced
For its most difficult section, the Nitrate Railways ordered six heavy tank locomotives from the Yorkshire Engine Co. in 1922. This section combined a grade of four percent with curves with a radius of 280 feet. The locomotives had the wheel arrangement 4-8-4T, but a rigid wheelbase of only twelve feet thanks to their small drivers with a diameter of only three and a half feet. For additional safety when running downhill, they were equipped with a Le Chatelier counter-pressure brake. The bunker behind the cab held 1,000 imperial gallons of oil, but was prepared to be converted to coal if needed.
Technical data
General
- Built
- 1924
- Manufacturers
- Yorkshire Engine Co.
- Wheel arrangement
- 4-8-4T (Northern)
- Gauge
- 1,435 mm (Standard gauge)
Dimensions and weights
- Wheelbase
- 3.66 m
- Service mass
- 113.8 t
- Water capacity
- 58,511 l
- Fuel capacity
- 4,546 l (oil)
Boiler
- Grate area
- 3.693 m²
- Firebox surface
- 15.236 m²
- Tube heating surface
- 165.46 m²
- Evaporative heating surface
- 180.697 m²
- Superheater surface
- 33.631 m²
- Total heating surface
- 214.3 m²
Power plant
- Driver diameter
- 1,067 mm
- Boiler pressure
- 12.4 bar
- Expansion type
- simple expansion
- Cylinders
- two, 559 x 508 mm
Power
- Power source
- steam
- Estimated power
- 969 kW (1,317 PS)
- Starting effort
- 156.9 kN
Calculated values
- Optimal speed
- 39 km/h
- Power-to-weight ratio
- 8.5 kW/t
- Heating Surface Equivalent
- 324.1 m²
- Cylinder volume/HSE
- 1 : 768.72
- Tractive force/Heating surface
- 1 : 15.29
- Grate area/Heating surface
- 1 : 58.04
- Firebox/Tube surface
- 1 : 10.86
- Total/Superheater
- 1 : 5.37