Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Victorian Railways class N

South Australian class 750

Australia 1925 83 produced
N 432 in April 2016 at the Victoria Railway Museum, North Williamstown Hugh Llewelyn CC BY-SA 2.0

The class N was a 2-8-2 goods locomotive with a low axle load for use on branch lines. It was developed from the class K 2-8-0 and used many parts from this. As there were plans to convert the Australian broad gauge network to standard gauge in the future, the locomotives had to be built in a way that they could been re-gauged later. As the Belpaire firebox of the K was mounted between the frames, the N received a longer high-pitched boiler whose firebox was located above the new trailing axle. This had the additional advantage that the firebox could now be built wider, what increased power.

The first batch of 20 was built between 1925 and 1928 in the railway's own workshops at Newport. In 1927, N 110 received a trailing truck booster. Although it remained the only class member with a booster and the booster was removed in 1944, the larger class X was built with boosters. Ten more were built in 1930 and 1931 of which the last three had Witte smoke deflectors. Starting in 1936, the class was rebuilt with modified front ends, which reduced the back pressure and increased power. In this process, the 27 other class members were fitted with larger smoke deflectors.

After World War II, more were built by North British in the UK which had a revised boiler with thermic syphons and a combustion chamber. A total of 50 were completed in 1949 and 1950. Another order for 20 was cancelled in 1951 after only three completed, bringing the total number to 83. In the same year, ten were sold to South Australian Railways which became class 750. There they were less popular with crews due to their small cabs.

Of the 73 remaining VR locomotives, 36 were converted to burn oil from 1951. The introduction of diesel-electrics from 1955 meant that the class was mostly used for shunting or to assist in wheat trains in the following years. A conversion to standard gauge never happened, as the class was already being withdrawn in 1962 when the first major standard gauge line was being opened. One locomotive each is being preserved in both states. N 432 is on display at Newport, while SAR 752 can be found at Port Adelaide.

Technical data

General

Property Coal Oil
Built 1925-1931, 1949-1950
Manufacturers Newport, North British
Wheel arrangement 2-8-2 (Mikado)
Gauge 1,600 mm (Irish broad gauge)

Dimensions and weights

Property Coal Oil
Length 20.56 m
Wheelbase 9.37 m
Rigid wheelbase 4.72 m
Total wheelbase 17.36 m
Service weight 77.2 t
Adhesive weight 55.5 t
Axle load 14.1 t
Total weight 126.7 t
Water capacity 21,365 l
Fuel capacity 6.1 t (coal) 6.1 t (oil)

Boiler

Property Coal Oil
Grate area 2.88 m²
Firebox surface 18.859 m²
Tube heating surface 116.129 m²
Evaporative heating surface 134.988 m²
Superheater surface 30.101 m²
Total heating surface 165.1 m²

Power plant

Property Coal Oil
Driver diameter 1,397 mm
Boiler pressure 12.1 bar
Expansion type simple expansion
Cylinders two, 508 x 660 mm

Power

Property Coal Oil
Power source steam
Estimated power 969 kW (1,317 PS) 1,007 kW (1,369 PS)
Starting effort 125.1 kN

Calculated values

Property Coal Oil
Factor of adhesion 1 : 4.35
Optimal speed 47 km/h 50 km/h
Power-to-weight ratio 12.5 kW/t 13.0 kW/t
Heating Surface Equivalent 289.5 m²
Cylinder volume/HSE 1 : 924.76
Adhesive weight/Total 1 : 1.39
Tractive force/Heating surface 1 : 15.83
Grate area/Heating surface 1 : 57.32
Firebox/Tube surface 1 : 6.16
Total/Superheater 1 : 4.48
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.