Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Caddo & Choctaw No. 4

McCloud River No. 19

United States 1915 1 produced
Photo from the late thirties when it was still operated by the McCloud George Landrock collection

The locomotive running as Oregon, Pacific and Eastern No. 19 was built by Baldwin in 1915 with works number 42000 and is operational again since March 16, 2026. Originally built for the Caddo and Choctaw Railroad as their No. 4, it was used to haul timber in Arkansas. For this role, the drivers had a diameter of only 48 inches. Its original operator named it “R.L. Rowan” after an engineer of the railroad.

As early as in 1918, it was sold to Mexico to the Compañía de Real del Monte y Pachuca and converted to burn oil. It returned to the USA in 1923 when it became McCloud River No. 19. This railroad already operated No. 18 that was very similar, but had originally been built for this railroad. In the fifties, both No. 18 and 19 were bought by the Yreka Western Railroad when the McCloud bought diesel locomotive.

After a short time in commercial service, it was again replaced by diesel locomotives and started a career in excursion service in 1958. In 1970, it was leased to the Oregon, Pacific and Eastern Railway where it also played a role in two movies. It came back to the Yreka Western in 1988 where it only operated for one more year. After some years in storage, it again operated at McCloud for some time, before returning to Yreka were it was retired in 2008. In 2017 it was bought by the Age of Steam Roundhouse. After an extensive restoration, it is in working order again today.

Technical data

General

Built
1915
Manufacturers
Baldwin
Wheel arrangement
2-8-2 (Mikado)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Wheelbase
8.26 m
Total wheelbase
17.44 m
Service mass
81.2 t
Adhesion mass
64.2 t
Total mass
131.1 t
Rigid wheelbase
3.99 m
Axle load
16.1 t
Water capacity
20,820 l
Fuel capacity
9.1 t (coal)

Boiler

Grate area
3.837 m²
Firebox surface
16.537 m²
Tube heating surface
215.721 m²
Evaporative heating surface
232.258 m²
Superheater surface
51.375 m²
Total heating surface
283.6 m²

Power plant

Driver diameter
1,219 mm
Boiler pressure
12.1 bar
Expansion type
simple expansion
Cylinders
two, 521 x 711 mm

Power

Power source
steam
Estimated power
932 kW (1,267 PS)
Starting effort
162.2 kN

Calculated values

Factor of adhesion
1 : 3.88
Optimal speed
35 km/h
Power-to-weight ratio
11.5 kW/t
Heating Surface Equivalent
417.7 m²
Cylinder volume/HSE
1 : 725.15
Adhesive weight/Total
1 : 1.27
Tractive force/Heating surface
1 : 11.94
Grate area/Heating surface
1 : 73.92
Firebox/Tube surface
1 : 13.04
Total/Superheater
1 : 4.52
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.