loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings

Navigation

Page views since 2023-01-26: 859822
Saxon V T
German Reichsbahn classes 8982 and 892
Germany | 1872
147 produced
“Berggeist” from the first series on a Hartmann company photo
“Berggeist” from the first series on a Hartmann company photo

The Royal Saxon State Railways operated a number of freight tank locomotives under the designation V T. These were made between 1872 and 1920 with some modifications, but basically had the same design.

The locomotives had three coupled axles and no carrying axles and were primarily intended for use on branch lines and for shunting. The boilers were of the Crampton or Belpaire type and surrounded by water tanks that were drawn very far forward. The first series in particular had a very large and hemispherical steam dome, which was somewhat less conspicuous in the later engines. Other similarities were an internal Allan valve gear and axles, which were all fixed due to the short wheelbase.

The first machines built between 1872 and 1877 had a boiler pressure of 8.5 or 10 bars, were lighter than their successors with an axle load of between 13.5 and 15 tonnes and had water tanks that were brought forward to the buffer beam. In the years 1884 to 1892, coupled wheels with a diameter of 1,420 instead of 1,400 mm were installed and some changes were made to externally visible assemblies. These included a flat-topped steam dome, shorter water tanks, and a taller cab.

Despite the same maximum speed, the third series from 1895 to 1901 had wheels with a diameter of just 1,260 mm and a tank with a pressure of 12 bars, which significantly increased the tractive effort. Another distinguishing feature of these locomotives was the kink in the back of the driver's cab.

The last regularly manufactured series came with a few years delay and was built between 1914 and 1919. Externally, it differed from its direct predecessors in that it had a coal box behind the driver's cab and a higher boiler, but it was in the same range in terms of power. The first of this series were provided with gangways to the train, which is why the coal box was divided in the middle and the water boxes were narrower to allow running boards to the front. A single last machine was created in 1920 from the boiler of a locomotive that was intended for the Turkish State Railways and was no longer delivered due to the First World War.

A total of 147 locomotives were completed, of which the four series contained 30, 18, 92 and 16 units. The remaining machines were classified by the Reichsbahn as classes 8982 and 892, but many of them were already retired between 1923 and 1925. Most of the regular Reichsbahn locomotives were taken out of service at the beginning of the 1930s, but some were able to continue to be used in depots or as works locomotives. Of the relatively small number of locomotives in the GDR, the last were used until 1967.

Variant1872 variant1883 variant1895 variant1914 variant
General
Built1872-18771883-18921895-19011914-1919
ManufacturerHartmann
Axle config0-6-0T (Six-coupled) 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Length30 ft 5 3/16 in31 ft 5 7/16 in31 ft 7 5/16 in32 ft 2 13/16 in
Empty weight69,886 lbs76,500 lbs72,973 lbs84,437 lbs
Service weight89,508 lbs94,799 lbs92,594 lbs107,585 lbs
Adhesive weight89,508 lbs94,799 lbs92,594 lbs107,585 lbs
Axle load29,762 lbs31,526 lbs30,865 lbs35,935 lbs
Fuel capacitycoal
Boiler
Grate area15.1 sq ft14 sq ft16.1 sq ft
Firebox area73.2 sq ft75.3 sq ft92.6 sq ft
Tube heating area1,026.9 sq ft797.6 sq ft1,007.5 sq ft
Evaporative heating area1,100.1 sq ft873 sq ft1,100.1 sq ft
Total heating area1,100.1 sq ft873 sq ft1,100.1 sq ft
Variant1872 variant1883 variant1895 variant1914 variant
Power Plant
Driver diameter55.1 in55.9 in49.6 in
Boiler pressure123 psi145 psi174 psi
Expansion typesimple
Cylinderstwo, 16 x 24 intwo, 18 x 24 intwo, 15 3/4 x 23 5/8 intwo, 16 15/16 x 23 5/8 in
Power
Power sourcesteam
Estimated power349 hp (260 kW)375 hp (280 kW)469 hp (350 kW)
Optimal speed19 mph14 mph15 mph
Top speed25 mph31 mph
Starting effort11,667 lbf17,139 lbf17,466 lbf20,184 lbf
Calculated Values
steam locomotive
freight
tank locomotive
last changed: 01/2022
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language