loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings

Navigation

Page views since 2023-01-26: 859642
German Federal Railway E 40
later class 140
Germany | 1957
879 produced
140 640 in the year 2007 near Ratheim
140 640 in the year 2007 near Ratheim
M. Bienick

During the development of the standard electric locomotives, it quickly became clear that in the future the fast four-axle E 10 and the heavy six-axle E 50 would not be sufficient to serve all train types adequately. The E 40, which was primarily intended for freight trains, thus was developed from the E 10 by reducing the gear ratio and eliminating the dynamic brake. With a maximum speed of 100 and later 110 km/h, it could haul trains of 2,100 tonnes at 90 km/h on the flat and was still fast enough to be able to haul passenger trains if necessary.

The last series, also known as class 1408, was equipped for push-pull operation and multiple working. This meant that push-pull trains could be run in S-Bahn-like operations on the one hand and heavy freight trains on the other. Some locomotives even had knuckle couplings for hauling heavy ore trains. Another modification was the E 4011, better known under its later class designation 139. The 31 examples were intended for use on steep stretches and were again fitted with an dynamic brake

Including the class 139 879 examples were built, making them the most numerous standard electric locomotive. Over time, their use in front of passenger trains disappeared from their everyday field of activity, but they remained indispensable in use in front of freight trains for a long time. Only after the turn of the millennium did the stock at DB AG fall to around 300 units due to the introduction of new three-phase locomotives. Later, depending on the development of the economy, the remaining ones were stored and reactivated several times as required, e.g. to compensate for missing capacities or to replace failed locomotives. The last of these were retired in 2014, but there are still many examples with private railways.

General
Built1957-1973
Manufacturermechanical part: Krupp, Henschel, Krauss-Maffei, electrical part: SSW, BBC, AEG
Axle configB-B 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Length54 ft 1 3/16 in
Wheelbase37 ft 0 7/8 in
Rigid wheelbase11 ft 1 7/8 in
Service weight182,983 lbs
Adhesive weight182,983 lbs
Axle load45,856 lbs
Boiler
Power Plant
Power
Power sourceelectric - AC
Electric system15.000 V 16⅔ Hz
Hourly power4,962 hp (3,700 kW)
Continuous power4,854 hp (3,620 kW)
Top speed68 mph
Starting effort61,822 lbf
Calculated Values
electric locomotive
freight
last changed: 02/2022
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language