Banner
Navigation
loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings

Navigation

Page views since 2023-01-26: 3828868
Victorian Railways class B
go back
Australia | 1861
34 produced
No. 62 from the second Beyer-Peacock batch, built in 1863, photographed in October 1885
No. 62 from the second Beyer-Peacock batch, built in 1863, photographed in October 1885

The first true mainline locomotives of the Victorian Railways were 34 2-4-0 passenger locomotives introduced in 1862. Today better known as class B, they only got this designation in 1886. Originally wood-fired, they had two chambers in the firebox which could be fired individually. These locomotives had outside frames, inside cylinders and outside coupling rods, leading to the nickname “Overarmers”.

In 1861 and 1862, 17 each were built in Britain by Black, Hawthorn & Co. and Beyer, Peacock & Co. In 1872, six more were built by the second of these two manufacturers. As late as in 1880, two more were completed in Australia by Phoenix Foundry of Ballarat. Originally, they carried numbers between 32 and 87 with gaps. When passenger locomotives only got even numbers, they received new numbers between 46 and 188.

In the 1880s, they were outclassed by new 4-4-0 locomotives. Additionally, newer branch lines were constructed in a cheaper way than the original ones, so that the 2-4-0 locomotives with their rigid chassis were not very suited for these lines. Nevertheless, their boiler pressure was increased from 130 to 140 psi and the cylinders were enlarged from 16 to 17 or even 17 and a half inches. Their withdrawals came between 1904 and 1917. In 1952, the first mainline diesel locomotive of the VR again became class B.

Variantas builtrebuilt
General
Built1861-1880
ManufacturerBlack, Hawthorn & Co., Beyer, Peacock & Co., Phoenix Foundry
Wheel arr.2-4-0 (Porter) 
Gauge5 ft 3 in (Irish broad gauge)
Dimensions and Weights
Wheelbase16 ft 9 in
Rigid wheelbase16 ft 9 in
Service weight79,128 lbs
Adhesive weight56,728 lbs
Total weight137,368 lbs
Axle load39,200 lbs
Water capacity2,522 us gal
Fuel capacity8,960 lbs (coal)
Boiler
Grate area15.3 sq ft
Firebox area113.7 sq ft
Tube heating area901.3 sq ft
Evaporative heating area1,015 sq ft
Total heating area1,015 sq ft
Variantas builtrebuilt
Power Plant
Driver diameter72 in
Boiler pressure130 psi140 psi
Expansion typesimple
Cylinderstwo, 16 x 24 intwo, 17 1/2 x 24 in
Power
Power sourcesteam
Estimated power320 hp (239 kW)
Starting effort9,429 lbf12,148 lbf
Calculated Values
steam locomotive
passenger
last changed: 05/2025
Search