Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Galician Carl Ludwig Railway IId and IIe

Imperial-Royal State Railways class 22

Austria-Hungary 1870 18 produced
CLB No. 2 “Kraków”, most likely works photo by Maschinenfabrik Esslingen PD

The Galician Carl Ludwig Railway originated from the k.k. Eastern State Railways and operated their lines east of Kraków. These lines are now in Poland and the Ukraine and went via Lemberg and Tarnopol to the border of the Russian Empire. In 1870, ten express locomotives with a 2-4-0 wheel arrangement were ordered from Maschinenfabrik Esslingen, which were classified as IId. In 1878 and 1882 a total of eight more were delivered by the Wiener Neustädter Lokomotivfabrik and designated IIe. As was usual at the time, all three axles were firmly mounted in the frame, but the overall wheelbase of just 3.32 meters still ensured sufficient ability to negotiate curves.

The locomotives from Esslingen were given the names of towns along the CLB lines, the others only numbers. After the railway was nationalized again in 1892, they were given the numbers 2231-2248 by the kkStB. In the same year they received new boilers. Some locomotives on the Kronprinz-Rudolf-Bahn also had numbers starting at 2201, but these became class 122 from 1905 and the CLB locomotives became class 22. All but three locomotives were retired between 1906 and 1915. The fate of the remaining ones was lost in 1917 in the turmoil of war, but probably two came to Poland and one to Russia.

Technical data

General

Built
1870-1871, 1879, 1882
Manufacturers
Esslingen, Wiener Neustadt
Wheel arrangement
2-4-0 (Porter)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Wheelbase
3.52 m
Empty mass
33.4 t
Service mass
38.1 t
Adhesion mass
25.9 t
Rigid wheelbase
3.52 m
Water capacity
8,800 l
Fuel capacity
6.2 t (coal)

Boiler

Grate area
1.64 m²
Firebox surface
7.5 m²
Tube heating surface
111.5 m²
Evaporative heating surface
119 m²
Total heating surface
119.0 m²

Power plant

Driver diameter
1,574 mm
Boiler pressure
10 bar
Expansion type
simple expansion
Cylinders
two, 395 x 632 mm

Power

Power source
steam
Estimated power
350 kW (476 PS)
Top speed
55 km/h
Starting effort
53.2 kN

Calculated values

Factor of adhesion
1 : 4.77
Optimal speed
40 km/h
Power-to-weight ratio
9.2 kW/t
Heating Surface Equivalent
156.5 m²
Cylinder volume/HSE
1 : 989.73
Adhesive weight/Total
1 : 1.47
Tractive force/Heating surface
1 : 9.35
Grate area/Heating surface
1 : 72.56
Firebox/Tube surface
1 : 14.87
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.