loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings
Czechoslovak State Railways Tatra tower railcar
later M 120.3, M 120.4, M 130.2, M 130.3, M 140.1 and M 11.0
Czechoslovakia | 1928
221 produced
M 130.2 railcar on a Tatra works photo
M 130.2 railcar on a Tatra works photo

Tatra developed the vehicles, also known as “tower railcars”, to transition passenger transport on branch lines and narrow-gauge railways with low passenger density from steam to internal combustion engines. Designer Hans Ledwinka's idea was to simplify operation and reduce costs with a single, elevated driver's cab. Its chassis corresponded to a two-axle goods wagon and the engine was suspended in the middle. The driver sat above the engine on a rotating chair from which he could see both directions of travel.

Most variants were powered by a petrol engine with an output of between 65 and 120 hp, which was connected to a four-speed gearbox and drove one axle. A conventional reversing gear was installed in the first variants. Later, engines with two camshafts were used, which could turn in both directions and thus made it possible to drive forwards and backwards. The tanks were arranged on the roof in front of and behind the cab. Depending on the engine power installed and the route profile, up to two specially developed trailers could be attached.

The first construction lot from 1928 included three different types. The M 120.3 series with 36 seats and an overall length of 9.20 m, which reached 55 km/h and of which a total of 27 examples were built up to 1930, was created for passenger transport on standard-gauge routes. At the same time, the M 140.1 series for express freight traffic was created, which was only 5.80 m long, was the fastest variant at 70 km/h and was only built four times. Furthermore, the M 11.0 series, which was somewhat narrower and shorter than the M 120.3 series, was built nine times for the Bosnian gauge of 760 mm.

The variants built later were all passenger railcars in standard gauge, which were between 10.53 and 10.70 m long and had a higher engine output. It all started with the M 120.4 series, of which 89 examples were built between 1930 and 1935. They initially had 100 and later 120 hp and were 60 km/h fast. A total of 63 examples of the M 130.2 series were built between 1933 and 1937 with the same dimensions and power data, but a new interior design. At the same time, the M 130.3 series was created, 30 of which had a diesel engine with initially 120 and later 125 hp and were otherwise almost identical to their sisters.

The vehicles were distributed to many branch lines within Czechoslovakia. After the annexation of the Sudentenland by Germany and World War II, some vehicles were removed from their ancestral territory. Just some of the narrow-gauge railcars of the M 11.0 series made it to Austria and later others were on Hungarian or Romanian territory. The majority of the vehicles remained in Czechoslovakia after the end of the war. With the introduction of the modern railcars of the M 131.1 series, the M 120.3 series was at first phased out by 1949. The M 120.4 series lasted the longest, the last examples of which were parked in 1965.

VariantM 120.3M 140.1M 11.0M 130.3 (late variant)
General
Built1928-193019281928-19321933-1937
ManufacturerTatra Kopřivnice, Vagonka Tatra Studénka
Axle configA1 
Gauge4 ft 8 1/2 in (Standard gauge)2 ft 5 15/16 in (Bosnian gauge)4 ft 8 1/2 in (Standard gauge)
Seats3603837
Dimensions and Weights
Length30 ft 2 3/16 in19 ft 0 3/8 in28 ft 2 9/16 in35 ft 1 1/4 in
Wheelbase13 ft 10 1/8 in11 ft 6 9/16 in13 ft 1 1/2 in16 ft 4 7/8 in
Rigid wheelbase13 ft 10 1/8 in11 ft 6 9/16 in13 ft 1 1/2 in16 ft 4 7/8 in
Empty weight18,298 lbs13,007 lbs15,983 lbs34,392 lbs
Service weight27,117 lbs28,440 lbs42,990 lbs
Adhesive weight13,228 lbs14,330 lbs22,487 lbs
Axle load13,228 lbs14,330 lbs22,487 lbs
Boiler
VariantM 120.3M 140.1M 11.0M 130.3 (late variant)
Power Plant
Power
Power sourcepetrol-mechanicdiesel-mechanic
Top speed34 mph43 mph25 mph37 mph
EngineTatra
Engine type6-cyl. petrol6-cyl. diesel
Engine output64 hp (48 kW)123 hp (92 kW)
Calculated Values
petrol railcar
DMU
railbus
local
Hans Ledwinka
last changed: 01/2022
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language