loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings

Navigation

Page views since 2023-01-26: 440606
London & South Western class 395
Great Britain | 1881 | 70 produced
flickr/stratfordman72

One part in William Adams' modernization program for the London & South Western Railway was the class 395 as a standard goods locomotive. Like most British goods locomotives of the late 19th century, it was a relatively simple 0-6-0 with inside cylinders. 70 were built by Neilson between 1881 and 1886.

In World War I, 50 were sold to the ROD for use in Palestine and Mesopotamia. After the war they were used by civil operators until 1928 and 1936, respectively. In the UK, the 20 remaining locomotives came to the Southern Railway in 1923 and only two of these didn't make it to British Railways in 1948. They were withdrawn between 1950 and 1959, so some lasted for more than 70 years.

General
Built1881-1886
ManufacturerNeilson & Co.
Axle config0-6-0 (Six-coupled) 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Wheelbase13 ft
Rigid wheelbase13 ft
Service weight84,224 lbs
Adhesive weight84,224 lbs
Total weight148,400 lbs
Axle load30,464 lbs
Water capacity3,002 us gal
Fuel capacity6,720 lbs (coal)
Boiler
Grate area17.8 sq ft
Firebox area108 sq ft
Tube heating area1,079 sq ft
Evaporative heating area1,187 sq ft
Total heating area1,187 sq ft
Power Plant
Driver diameter61 in
Boiler pressure140 psi
Expansion typesimple
Cylinderstwo, 17 1/2 x 26 in
Power
Power sourcesteam
Estimated power450 hp (336 kW)
Optimal speed18 mph
Starting effort15,533 lbf
Calculated Values
steam locomotive
freight
Willian Adams
last changed: 07/2024
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language