loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings

Navigation

Page views since 2023-01-26: 859925
Albion Mines “Samson”, “Hercules” and “John Buddle”
Canada | 1838
3 produced
“Samson” at the “Fair of the Iron Horse” 1927
“Samson” at the “Fair of the Iron Horse” 1927
Fraser / Nova Scotia archivees

The “Samson” and its two sisters were among the first steam locomotives in Canada. They had been ordered from Hackworth in Durham for the Albion mines in Nova Scotia. In May 1839 they arrived disassembled by ship in Canada and were then taken to their destination and assembled. The three coupled axles were driven by vertical cylinders. The boiler had a return flue, meaning the firebox and chimney were both at the front. Thus, the positions of driver and fireman were at opposite ends.

Despite its primitive design, the “Samson” remained in regular service at the Albion Mines until 1867, during which time it also had to pull passenger trains. Up until 1885, it was used to assist other locomotives when needed and had a higher tractive effort than more modern, faster locomotives. In 1883 it made a trip to the Chicago Railroad Fair.

Only in 1893 it was rescued from the junkyard and preserved with a passenger car by the Baltimore & Ohio until it came back to Canada in 1927. Today it can be seen in the museum in Stellarton, Nova Scotia. This makes it the oldest surviving locomotive in Canada and also is almost in its original condition.

General
Built1838
ManufacturerTimothy Hackworth
Axle config0-6-0 (Six-coupled) 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Wheelbase8 ft 8 in
Rigid wheelbase8 ft 8 in
Service weight37,920 lbs
Adhesive weight37,920 lbs
Axle load12,640 lbs
Water capacity540 us gal
Fuel capacitycoal
Boiler
Power Plant
Driver diameter48 in
Boiler pressure60 psi
Expansion typesimple
Cylinderstwo, 15 1/4 x 16 in
Power
Power sourcesteam
Estimated power80 hp (60 kW)
Optimal speed13 mph
Top speed8 mph
Starting effort3,954 lbf
Calculated Values
steam locomotive
freight
Timothy Hackworth
prototype
last changed: 04/2023
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language